The 330101-XX-XX-10-02-05 MOD:147773-00-12 is a non-contact eddy current proximity transducer probe belonging to the Bently Nevada 3300 XL series 8 mm proximity transducer system. This specific modification (MOD) code represents a 1.0-meter cable length, a ClickLoc coaxial miniature connector, and hazardous area approvals, which functions together with a 3300 XL extension cable and a 3300 XL Proximitor sensor to form a complete measurement system.
Probes, extension cables, and Proximitor sensors are fully interchangeable in any combination
Fully compatible with non-XL 3300 series 5 mm and 8 mm transducer system components
The probe tip is integrally molded and encapsulated in Polyphenylene Sulfide (PPS) plastic
The 330101-XX-XX-10-02-05 MOD: 147773-00-12 belongs to the 3300 XL 8 mm eddy current proximity transducer system, which delivers advanced performance in proximity measurement. The standard 5-meter system fully complies with the API 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. It supports complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need for bench calibration. Additionally, this component is fully backward compatible and interchangeable with non-XL 3300 series 5 mm and 8 mm system components.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330101-XX-XX-10-02-05 MOD:147773-00-12 Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Oil & Gas Exploration
Monitoring the axial displacement of large water injection pumps on offshore drilling platforms.
Petrochemical Refining
Monitoring the radial shaft vibration of hydrocracking compressors in ethylene plants.
Thermal Power Generation
Monitoring the speed and Keyphasor signals of bearings in ultra-supercritical steam turbines.
Nuclear Power Generation
Monitoring the shaft vibration of reactor coolant pumps (RCP) in nuclear islands.
Hydroelectric Power Generation
Monitoring the eccentricity and runout of the main shaft in large hydro-generator units.
Coal Chemical Industry
Monitoring the rotor condition of centrifugal compressors in air separation units (ASU).
During operation, ensure the probe installation gap complies with the official linear measurement range, and never hot-plug under power to avoid damaging the Proximitor.
Avoid bending or crushing the coaxial cable, regularly inspect the locking status of the ClickLoc connector, ensure the mechanical mounting surface is free of ferromagnetic contaminants, and strictly adhere to explosion-proof and anti-static regulations in hazardous areas.
The 330101-XX-XX-10-02-05 MOD:147773-00-12 proximity probe system provides an output voltage proportional to the distance between the probe tip and the observed conductive surface, measuring both static (position) and dynamic (vibration) values [141600-pdf, 141620-pdf]. The primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
What is the main function of 330101-XX-XX-10-02-05 MOD: 147773-00-12?
To control flow, regulate pressure, transmit signals, or connect key parts in a system.
Which industries use 330101-XX-XX-10-02-05 MOD: 147773-00-12?
Widely used in automation, petrochemical, machinery manufacturing, or water treatment industries.
What is the working principle of 330101-XX-XX-10-02-05 MOD: 147773-00-12?
It changes its state via mechanical action or electrical response to affect the whole system.
What daily maintenance does 330101-XX-XX-10-02-05 MOD: 147773-00-12 need?
Check for wear and looseness; keep clean.
How many parts do you have in stock?
We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies. If you are unable to find what you are looking for then don’t panic.
Do you offer global delivery services?
yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.