With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330180-X1-05 MOD:145004-66 is a 3300 XL series preamplifier sensor manufactured by Bently Nevada. This model is a core electronic module in industrial rotating machinery monitoring systems, and its most notable feature is its special material logic.
One 3300 XL 8 mm probe
One 3300 XL extension cable
One 3300 XL Proximitor Sensor
The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components. Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable with other non XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Nuclear Power Generation
Monitoring shaft displacement of Reactor Coolant Pumps (RCP) where shafts are made of high-grade stainless steel requiring MOD-66 calibration.
Petroleum Refining
Monitoring shafts with special coatings or materials in sour gas compressors.
LNG Industry
Performing gap voltage calibration for cryogenic alloy materials on LNG submerged pumps.
Chemical Industry
Monitoring the runout of large agitator shafts to prevent seal failure in highly corrosive environments.
Air Separation
Monitoring shafts made of titanium alloys or special stainless steel in turbo-expanders.
Pulp & Paper
Monitoring bearing wear and shaft runout on stock pumps exposed to chemical pulp.
When using the 330180-X1-05 MOD:145004-66 Proximitor, since MOD:145004-66 is customized for a specific non-standard target material (such as a particular stainless steel or alloy), it must never be used on standard 4140 steel or other mismatched shafts, as this will lead to significant measurement errors. During installation, ensure the total system length (probe plus cable) matches the Proximitor's design, mount it securely on a DIN rail, and ensure firm terminal connections. Additionally, regularly verify the linear output accuracy on the target material and keep connectors dry and clean to prevent signal drift or reading errors caused by moisture.
It is a 3300 XL series Proximitor Sensor manufactured by Bently Nevada, specifically modified for calibration to a non-standard target material.
What is the primary function of 330180-X1-05 MOD:145004-66?
As the core of the eddy current sensor system, it converts gap changes detected by the probe into a proportional voltage signal output.
Which probe is 330180-X1-05 MOD:145004-66 compatible with?
It is typically used with 3300 XL 5mm or 8mm probes.
What is the standard output signal for 330180-X1-05 MOD:145004-66?
Its standard output is typically a voltage signal of -200 mV/mil (approx. 7.87 V/mm).
What are the environmental temperature requirements for 330180-X1-05 MOD:145004-66?
Its operating temperature range is typically -51°C to +100°C.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
