Bently Nevada 21505-00-44-10-02 is an evidence-bounded 7200 Series 8 mm armored standard-mount proximity probe configuration. The customer-supplied Bently Nevada Technical/Ordering Information scan maps the complete requested 21505 code.
- Exact requested identity: 21505-00-44-10-02
- Product class: 7200 Series 8 mm armored standard-mount proximity probe configuration
- Series: 7200 Proximity Transducer System
- Probe family: 21505 - 8 mm standard mount, 3/8-24, stainless-steel armor
System role: It is an 8 mm standard-mount, 3/8-24 UNF-2A probe with stainless-steel lead armor and the documented case and cable options. Only facts stated by the cited Baker Hughes / Bently Nevada material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Use only with the exact host, terminal base, cable, firmware and engineering configuration documented for the installed system. Use only with the matching 7200 extension cable and 18745 Proximitor that produce the required 5 m or 9 m total system length. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete Bently Nevada 21505-00-44-10-02 physical label and installed-system documentation before use.
Apter Power 21505-00-44-10-02 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited Baker Hughes / Bently Nevada evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current Baker Hughes / Bently Nevada documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for Bently Nevada 21505-00-44-10-02.
System documentationProvides a source-traceable boundary for the documented Bently Nevada 7200 5 mm and 8 mm proximity transducer system configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact Baker Hughes / Bently Nevada documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete Bently Nevada 21505-00-44-10-02 label, revision and installed-system documentation before use.
2Use only with the matching 7200 extension cable and 18745 Proximitor that produce the required 5 m or 9 m total system length.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
