Bently Nevada 146054-36-05-01-05 is an evidence-bounded configured 3300 ceramic-capped proximity probe. The complete 146054 ordering code is documented by the current manufacturer ordering table.
- Exact requested identity: 146054-36-05-01-05
- Product class: configured 3300 ceramic-capped proximity probe
- Probe family: 146054, 3/8-24 UNF, without armor
- Overall case length: 3.6 in
System role: It is a 3/8-24 UNF ceramic-capped probe without armor, configured for front-side corrosive or high-pressure exposure within the documented limits. Only facts stated by the cited Baker Hughes / Bently Nevada material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Use only with the matching 3300 extension cable and Proximitor Sensor, preserving the total electrical system length and target calibration. The 146054 rear is not sealed and must not be exposed to destructive liquids or gases; do not treat it as the rear-sealed 146056 design. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete Bently Nevada 146054-36-05-01-05 physical label and installed-system documentation before use.
Apter Power 146054-36-05-01-05 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited Baker Hughes official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current Baker Hughes documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for Bently Nevada 146054-36-05-01-05.
System documentationProvides a source-traceable boundary for the documented Bently Nevada 3300 ceramic-capped proximity transducer system configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact Baker Hughes / Bently Nevada documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete Bently Nevada 146054-36-05-01-05 label, revision and installed-system documentation before use.
2The 146054 rear is not sealed and must not be exposed to destructive liquids or gases; do not treat it as the rear-sealed 146056 design.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
