Bently Nevada CB2W100-064 is an evidence-bounded CB2W100 two-wire transducer interconnect cable. Exact model identity is documented by the cited manufacturer source.
- Exact requested identity: CB2W100-064
- Product class: CB2W100 two-wire transducer interconnect cable
- Cable family: CB2W100
- Length: 64 ft (19.5 m)
System role: It is a 64 ft (19.5 m) CB2W100 shielded interconnect cable with isolated two-socket splash-proof connector and blunt-cut field end. Only facts stated by the cited Baker Hughes / Bently Nevada material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Use only with a documented compatible two-wire transducer and monitor input, and apply the sensor-specific restrictions in the current datasheet. CB2W100 is a cable, not a sensor; the splash-proof version is not recommended with the 200350 accelerometer. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete Bently Nevada CB2W100-064 physical label and installed-system documentation before use.
Apter Power CB2W100-064 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited Baker Hughes official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current Baker Hughes documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for Bently Nevada CB2W100-064.
System documentationProvides a source-traceable boundary for the documented Bently Nevada two-wire velocity and accelerometer measurement chains configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact Baker Hughes / Bently Nevada documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete Bently Nevada CB2W100-064 label, revision and installed-system documentation before use.
2CB2W100 is a cable, not a sensor; the splash-proof version is not recommended with the 200350 accelerometer.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
