With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
Condition Monitoring Card
(16 Channels)
025:Embedded Software Version
014:Hardware Version
16 physical input channels
32-bit high-performance
Digital Signal Processor (DSP)
The VM600 CMC16 200-530-025-014 is a vibration monitoring module manufactured by Vibro-Meter, a subsidiary of Meggitt. It is a core component of the VM600 series rack-mount systems and is primarily used for real-time vibration monitoring, condition monitoring, and alarm protection of large, critical rotating machinery in industries such as power generation and oil and gas.
The first 4 channels are configurable as tachometer/speed inputs
The last 12 channels are configurable as quasi-static process value inputs
The Meggitt Vibro-Meter VM600 CMC16 is a high-performance, 16-channel condition monitoring card (vibration monitoring module). Serving as an intelligent front-end data acquisition unit (DAU) [Meggitt Sensing Systems], it features 16 fully parallel dynamic input channels—with the first 4 channels reconfigurable for tachometer/speed inputs—and maintains comprehensive tracking across an extensive machinery velocity spectrum from 15 RPM to 30,000 RPM.Equipped with an onboard microcontroller, the module autonomously executes all task scheduling, spectral transformations (FFT), bandwidth extractions, unit scaling, and threshold limit checks, while utilizing adaptive monitoring technology to dynamically update alert setpoints based on real-time operational speed and load. During critical transient phases such as startup, coast-down shutdown, or overspeed events, it initiates high-density data logging via its integrated "Oscilloscope Mode" regulated by customizable time increments or precise RPM intervals, transferring the digitized datasets to the VM600 CMS host software via a CPUM Ethernet interface card or a serial link.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
VIBRO METER VM600 CMC16 200-530-025-014 Condition Monitoring Card Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Thermal Power
Monitors the absolute and relative shaft vibration of large steam turbine generator sets to prevent catastrophic damage caused by excessive vibration.
Nuclear Power
Provides highly reliable safety and vibration monitoring for primary reactor coolant pumps and conventional island turbines in compliance with API 670.
Oil & Gas
Continuously monitors the mechanical health of high-power oil pumps and gas compressors in pipeline stations to avoid transportation downtime.
Wind Power
Monitors low-frequency vibration and shocks in main shaft bearings and speed-increasing gearboxes to predict gear tooth breakage and bearing fatigue.
Hydropower Industry
Monitors water turbine generator shaft swing and guide bearing vibration to evaluate hydraulic excitation caused by hydraulic imbalance.
When using the VM600 CMC16 (200-530-025-014) card, three critical points must be observed. First, ensure correct input signal impedance matching and sensor power supply configurations (via jumpers or software) to prevent channel burnout or signal distortion. Second, it must be paired with the dedicated IOC16T I/O card and dual-redundant power supplies, and strict anti-static (ESD) and safety procedures must be followed during hot-swapping to prevent module damage or false system trips. Lastly, guarantee that the firmware version is fully compatible with the host monitoring software (e.g., VibroSight), and periodically calibrate channels to ensure the accuracy of FFT spectrum analysis and adaptive alarms.
It is a 16-channel condition monitoring card (also known as a vibration monitoring module) produced by Meggitt Vibro-Meter.
What is the primary field application of the VM600 CMC16 200-530-025-014?
It is used to continuously track the shaft vibration, axial displacement, bearing vibration, and speed of large rotating machinery (e.g., gas turbines, compressors, hydro-turbines), providing raw spectrum and waveform data streams for condition monitoring software.
How to properly install and use the VM600 CMC16 200-530-025-014 in a system rack?
Vertically insert it into a front slot of a standard VM600 rack enclosure (such as the ABE040) to draw 5V DC power from the backplane bus. Concurrently, a matching IOC16T input/output card must be installed on the rear of the rack to connect external transducer wiring.
What types of field transducers can connect directly to the VM600 CMC16 200-530-025-014?
It directly accepts sensor signal inputs from proximity probe systems, piezoelectric accelerometers, piezoelectric velocity sensors, and magnetic pickup speed sensors.
How does the VM600 CMC16 200-530-025-014 output analyzed data?
It does not directly output hardwired relay discrete signals for safety trips; instead, it uploads digitized, high-level analytical data to CMS condition monitoring software via the internal VME bus or an associated CPUM industrial Ethernet module within the same rack.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
