Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6ES5430-4UA13
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6ES5430-4UA13
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:6ES5430-4UA13
-
Estimated shipping dimensions:2x19.5x25.5cm
-
Weight:0.42 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Product designation:SIMATIC S5 430 digital input module
-
Input count:32
-
Input voltage:24 V DC
-
Electrical arrangement:Floating inputs
-
Mechanical version:Compact version U
-
Lifecycle:End of product lifecycle
Information
Overview
Manuals
Common Applications
Product Precautions
Siemens 6ES5430-4UA13 receives thirty-two 24 V DC field states for the compact-U SIMATIC S5 input section.
- 32 digital inputs
- 24 V DC input level
- Floating input arrangement
- Compact U mechanical version
The module acquires thirty-two field input states in the installed SIMATIC S5 rack. Service work preserves the slot, address allocation, front wiring and floating-circuit boundaries.
Important Notice: Record every input address and conductor assignment before removing 6ES5430-4UA13; do not substitute a nearby 430 suffix without a complete comparison.
Siemens 6ES5430-4UA13 Manuals & Downloads
Siemens 6ES5430-4UA13 Technical Reference (PDF)Siemens 6ES5430-4UA13 Installation & Commissioning Guide (PDF)
The technical reference consolidates exact product data and service boundaries. The installation guide organizes controlled replacement, wiring checks, commissioning and acceptance.
Discrete field sensing
Reads thirty-two documented 24 V DC field states.
Compact U rack service
Restores an existing S5 compact-U input position.
Machine interlock inputs
Collects configured permissive and status contacts in the controller project.
Maintenance replacement
Renews the exact module while preserving the complete address map.
Siemens 6ES5430-4UA13 installation checks: preserve the exact model identity, documented system arrangement and controlled acceptance evidence.
1
Confirm the complete Siemens 6ES5430-4UA13 marking and installed-system record before work.
2
Place the connected process or machine in its approved maintenance state.
3
Isolate and verify every applicable power, signal and field circuit before disconnection.
4
Record the slot, terminal, address, cable, connector and companion-hardware identities that apply.
5
Use grounded ESD controls and protect keyed interfaces, terminals and circuit boards from damage.
6
Retain the documented voltage, signal type, isolation, grounding and cable-routing arrangement.
7
Restore power in the approved sequence and review all relevant diagnostics.
8
Prove the intended field, interface or operator response and retain the acceptance record.
Technical notes
Record every input address and conductor assignment before removing 6ES5430-4UA13; do not substitute a nearby 430 suffix without a complete comparison.
FAQ View All FAQ
-
What identifies Siemens 6ES5430-4UA13?6ES5430-4UA13 is the exact Siemens digital input module described in the manufacturer product record.
-
Which function is documented for Siemens 6ES5430-4UA13?It is a SIMATIC S5 430 floating digital input module in compact U format with 32 inputs for 24 V DC signals.
-
What must be recorded before removing Siemens 6ES5430-4UA13?Record the complete order number, installed position, wiring or interface assignments and the controlled project reference before removal.
-
Why is the complete 6ES5430-4UA13 suffix important?Nearby family members can differ in channel arrangement, signal level, mechanics or system role; compare the full order number rather than the family prefix.
-
How should Siemens 6ES5430-4UA13 be installed?Use the documented SIMATIC position, approved cabinet practices and the installation record for the exact unit; isolate all applicable energy before work.
-
Which commissioning check applies to Siemens 6ES5430-4UA13?Restore the recorded configuration, then prove the intended signal, interface or operator function under controlled conditions before release.
-
Can Siemens 6ES5430-4UA13 be replaced by a similar model automatically?No. Verify the full order number and every published electrical, mechanical and project-dependent characteristic before any substitution.
-
What service evidence should be retained for Siemens 6ES5430-4UA13?Keep the installed-system record, wiring or configuration backup, inspection results and final functional acceptance with the maintenance history.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.