Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6ES5465-4UA12
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6ES5465-4UA12
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:6ES5465-4UA12
-
Estimated shipping dimensions:2x20.1x24.2cm
-
Weight:0.4 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Product designation:SIMATIC S5 465 analog input module
-
Input count:16
-
Electrical arrangement:Non-floating inputs
-
Mechanical version:Compact version U
-
Range selection:Measuring-range module required
-
Lifecycle:End of product lifecycle
Information
Overview
Manuals
Common Applications
Product Precautions
Siemens 6ES5465-4UA12 converts sixteen configured analog field channels for the SIMATIC S5 station, with the fitted measuring-range module defining the applied signal ranges.
- 16 analog inputs
- Non-floating input arrangement
- Compact U mechanical version
- Measuring-range module required
The module converts sixteen installed analog channels for the SIMATIC S5 project. Each sensor range, measuring-range module, channel wiring and reference potential is matched before commissioning.
Important Notice: Verify the fitted measuring-range module and every configured signal range before replacing or energizing 6ES5465-4UA12.
Siemens 6ES5465-4UA12 Manuals & Downloads
Siemens 6ES5465-4UA12 Technical Reference (PDF)Siemens 6ES5465-4UA12 Installation & Commissioning Guide (PDF)
The technical reference consolidates exact product data and service boundaries. The installation guide organizes controlled replacement, wiring checks, commissioning and acceptance.
Analog process measurement
Collects sixteen configured sensor or transmitter channels.
Legacy instrumentation renewal
Restores the exact S5 analog-input position during maintenance.
Range-module matching
Uses the installed measuring-range module for the documented signal range.
Process trend acquisition
Feeds approved analog values into the controller program and diagnostics.
Siemens 6ES5465-4UA12 installation checks: preserve the exact model identity, documented system arrangement and controlled acceptance evidence.
1
Confirm the complete Siemens 6ES5465-4UA12 marking and installed-system record before work.
2
Place the connected process or machine in its approved maintenance state.
3
Isolate and verify every applicable power, signal and field circuit before disconnection.
4
Record the slot, terminal, address, cable, connector and companion-hardware identities that apply.
5
Use grounded ESD controls and protect keyed interfaces, terminals and circuit boards from damage.
6
Retain the documented voltage, signal type, isolation, grounding and cable-routing arrangement.
7
Restore power in the approved sequence and review all relevant diagnostics.
8
Prove the intended field, interface or operator response and retain the acceptance record.
Technical notes
Verify the fitted measuring-range module and every configured signal range before replacing or energizing 6ES5465-4UA12.
FAQ View All FAQ
-
What analog module is Siemens 6ES5465-4UA12?It is the exact SIMATIC S5 465 non-floating analog input module documented by Siemens.
-
How many inputs does 6ES5465-4UA12 provide?The module provides 16 analog inputs.
-
Are the inputs floating?No. Siemens documents this exact execution with non-floating inputs.
-
Does 6ES5465-4UA12 require a measuring-range module?Yes. The fitted measuring-range module must match the configured sensor range.
-
Which mechanical format applies?The exact product record identifies compact version U.
-
What must be recorded before removal?Record all channel ranges, measuring-range module identity, reference potential, wiring and full order number.
-
Can another 465 module replace it automatically?No. Compare the exact suffix, channel count, range module, electrical arrangement and project settings.
-
What commissioning check applies?Verify each configured analog channel against a controlled input and retain the final acceptance results.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.