6ES7215-1HG40-0XB0 is a Siemens SIMATIC S7-1200 CPU 1215C compact controller with a 24 V DC supply, DC digital inputs, relay outputs, integrated analog I/O, two PROFINET ports, and 200 kB of program/data work memory.
- Siemens
- 1215C DC/DC/relay
- 20.4 to 28.8 V DC
- 14 x 24 V DC
The CPU executes machine or process logic, acquires onboard digital and analog inputs, operates relay and analog outputs, exchanges PROFINET data, and coordinates expansion modules from the TIA Portal project.
Important Notice: Use the complete 6ES7215-1HG40-0XB0 code and verify the physical nameplate and current Siemens documentation before installation or replacement.
Apter Power 6ES7215-1HG40-0XB0 Manuals and Guides
Important Notice: These are two separate Apter Power documents with distinct layouts and model-specific content, prepared from the manufacturer-published Siemens information named in each document. Confirm the physical nameplate, current manufacturer documents, and host-system requirements before installation or replacement.
SIMATIC S7-1200
Maintains the documented compact PLC execution and integrated mixed I/O role in a correctly matched installation.
Process and machine automation
Supports the control, communication, power, safety, measurement, or protection duty stated in the official source for this exact or verified family identity.
Lifecycle-controlled maintenance
Requires complete-code, nameplate, host-system, and project verification before replacement or recommissioning.
Read and follow the exact Siemens documentation and host-equipment instructions before use. Verify 6ES7215-1HG40-0XB0 from the physical nameplate.
Check 1
Match every character of 6ES7215-1HG40-0XB0 to the physical nameplate before work.
Check 2
Use the exact Siemens manual, wiring drawing, and safety instructions for the installed revision.
Check 3
De-energize and apply the required lockout, discharge, ESD, and stored-energy controls before removal.
Check 4
Back up firmware, parameters, controller project, calibration, and network settings where applicable.
Check 5
Verify supply, signal type, polarity, grounding, shielding, connector pinout, load, and environmental limits.
Check 6
Commission with the manufacturer test procedure and record results before returning equipment to service.
Videos
News
Applications
