6SL3210-5FB10-4UF1

FAQS

• What is Siemens 6SL3210-5FB10-4UF1?
  The Siemens 6SL3210-5FB10-4UF1 is a SINAMICS V90 PROFINET servo drive for a 0.4 kW motor, with a 200 to 240 V single- or three-phase AC input and IP20 enclosure in frame size B.
• What does 6SL3210-5FB10-4UF1 do in its Siemens system?
  It converts the supplied AC power into controlled three-phase motor output and exchanges cyclic motion commands, setpoints, status, and diagnostics with a compatible controller over PROFINET. It is used with a correctly matched Siemens servomotor, motor cable, encoder connection, line-side protection, and engineered motion project in packaging, handling, assembly, and machine-tool axes.
• Which signals or interfaces are documented for 6SL3210-5FB10-4UF1?
  Input voltage: 200 to 240 V AC, single- or three-phase, -15%/+10%; Input current: 5.0 A single-phase / 3.0 A three-phase; Input frequency: 45 to 66 Hz; Output current: 2.6 A; Output frequency: 0 to 330 Hz.
• Which components are compatible with 6SL3210-5FB10-4UF1?
  SINAMICS V90-compatible Siemens servomotor selected for the 0.4 kW drive rating PROFINET controller and motion project approved for the drive firmware Siemens motor and encoder cables matched to the motor and drive connectors Line protection, braking, EMC, grounding, and cabinet components specified by Siemens.
• Where is 6SL3210-5FB10-4UF1 typically applied?
  Packaging motion axes: Controls indexed conveyors, feeders, and sealing mechanisms Material handling: Executes position and speed commands for pick-and-place or transfer axes Assembly machines: Provides closed-loop servo motion for repeatable machine sequences Machine-tool auxiliaries: Drives engineered positioning axes within the published rating.
• What are the official weight and dimensions for 6SL3210-5FB10-4UF1?
  6SL3210-5FB10-4UF1 has a published net weight of 1.250 kg and 7.7 x 21.7 x 23.7 cm (Siemens packaging).
• What is the lifecycle status of 6SL3210-5FB10-4UF1?
  Siemens lists 6SL3210-5FB10-4UF1 in PM400 product phase-out status, effective 1 October 2025.
• What must be checked before installing 6SL3210-5FB10-4UF1?
  Drive identity: Match the complete MLFB, firmware, motor rating, and frame size Mains safety: Isolate the 200 to 240 V AC supply and allow the DC link to discharge before work Motor matching: Verify the servomotor, encoder, motor cable, and parameter set as one system PROFINET: Preserve device name, IP settings, telegram, timing, and controller project Commissioning: Test direction, limits, braking, emergency functions, and axis tuning before production.