What role does Phoenix Contact FL SWITCH SF 14TX/2FX 2832593 perform?

Phoenix Contact FL SWITCH SF 14TX/2FX 2832593 performs the documented role of a unmanaged industrial ethernet switch within its approved system architecture.

What published value is associated with copper ports on FL SWITCH SF 14TX/2FX 2832593?

The published copper ports for FL SWITCH SF 14TX/2FX 2832593 is 14 RJ45 ports.

How does the documentation identify copper data rate for FL SWITCH SF 14TX/2FX 2832593?

Documentation identifies copper data rate for FL SWITCH SF 14TX/2FX 2832593 as 10/100 Mbps with auto negotiation and auto crossing.

Which value should be checked for copper segment length when servicing FL SWITCH SF 14TX/2FX 2832593?

Service personnel should check copper segment length against the documented value of 100 m maximum.

Where does FL SWITCH SF 14TX/2FX 2832593 fit in the published system?

Within the published architecture, FL SWITCH SF 14TX/2FX 2832593 functions as the unmanaged industrial ethernet switch described for the installed equipment.

Why must the complete FL SWITCH SF 14TX/2FX 2832593 marking be recorded?

Recording the complete marking prevents a different suffix, rating or hardware configuration from being substituted during maintenance.

When FL SWITCH SF 14TX/2FX 2832593 is replaced, what must technicians verify?

Technicians must verify the installed fiber ports, mating hardware, wiring and approved configuration before energization.

Which acceptance check completes work on FL SWITCH SF 14TX/2FX 2832593?

Commissioning is complete only after identity, wiring, diagnostics and every affected operating function have passed the approved checks.

FL SWITCH SF 14TX/2FX 2832593

Name: FL SWITCH SF 14TX/2FX 2832593
Brand: Phoenix Contact
SKU: FL SWITCH SF 14TX/2FX 2832593

Unmanaged Industrial Ethernet Switch

Phoenix Contact FL SWITCH SF 14TX/2FX 2832593, angled view of RJ45 and fiber ports

Phoenix Contact FL SWITCH SF 14TX/2FX 2832593 switch, underside with DIN clip and label

Phoenix Contact FL SWITCH SF 14TX/2FX 2832593 switch, close-up of label with order number

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

Phoenix Contact FL SWITCH SF 14TX/2FX, order number 2832593, is an unmanaged industrial Ethernet switch with fourteen RJ45 copper ports and two SC multimode fiber ports. The switch uses store-and-forward operation for 10/100 Mbps industrial networks.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for FL SWITCH SF 14TX/2FX 2832593

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for FL SWITCH SF 14TX/2FX 2832593

Manufacturer:

Phoenix Contact
Product Category:

General Automation
Spare Part Number:

FL SWITCH SF 14TX/2FX 2832593
Estimated shipping dimensions:

20.5×11.53×3.0 cm
Weight:

0.38 kg
Tariff Code:

8537101190
Counliy of origin:

China
Product role:

Unmanaged industrial Ethernet switch
Order number:

2832593
Copper ports:

14 RJ45 ports
Copper data rate:

10/100 Mbps with auto negotiation and auto crossing
Copper segment length:

100 m maximum
Fiber ports:

2 SC multimode ports
Fiber data rate:

100 Mbps full duplex
Optical wavelength:

1300 nm
Published fiber distance:

Up to 6400 m with the specified fiber
Supply range:

18.5 to 30.2 V DC with redundant inputs
Mounting and enclosure:

DIN rail, aluminum housing, IP20
Operating environment:

0 to 55 °C; 5 to 95% RH, non-condensing

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

This switch expands a plant Ethernet segment with dense copper connectivity and two optical uplinks while requiring no managed-switch configuration.

Fourteen 10/100 Mbps RJ45 ports
Two 100 Mbps SC multimode fiber ports
Auto negotiation and auto crossing on copper ports
Redundant 24 V DC supply inputs with relay signaling contact

Use the full FL SWITCH SF 14TX/2FX and 2832593 identity when planning the cabinet and network. Confirm the multimode fiber type, optical budget, copper segment lengths, redundant supply wiring and signaling contact before commissioning. After connection, verify port speed, link/activity indications and end-to-end communication for every affected segment.

Important Notice: Confirm the exact 2832593 order number, the two SC multimode interfaces and the approved 24 V DC supply arrangement before installation.

Phoenix Contact FL SWITCH SF 14TX/2FX 2832593 Manuals & Downloads

Phoenix Contact FL SWITCH SF 14TX/2FX 2832593 Technical Reference (PDF)Phoenix Contact FL SWITCH SF 14TX/2FX 2832593 Installation & Commissioning Guide (PDF)

The first document organizes exact-model technical evidence; the second provides a separate evidence-led installation and commissioning workflow.

Machine-cell networking

Connects multiple 10/100 Mbps controllers and operator devices through the fourteen copper ports.

Fiber cabinet uplinks

Uses the two SC multimode interfaces to extend approved optical network segments.

Control-cabinet aggregation

Provides unmanaged store-and-forward switching on a DIN rail with redundant DC supplies.

Legacy Fast Ethernet expansion

Adds mixed copper and multimode connectivity without introducing a managed configuration layer.

Read the applicable Phoenix Contact instructions before work. Verify FL SWITCH SF 14TX/2FX 2832593 and the installed system configuration before isolation or replacement.

Record the complete FL SWITCH SF 14TX/2FX and 2832593 identity.

Isolate both redundant 24 V DC supply inputs before wiring changes.

Verify the multimode fiber type and optical distance for each SC link.

Inspect RJ45, SC and signaling-contact connectors before installation.

Keep copper segments within the published 100 m maximum length.

Mount the switch on the approved DIN rail with cabinet ventilation maintained.

Restore both supplies and confirm US1/US2 plus link, activity and speed LEDs.

Test every affected Ethernet path and record the final port map before release.

Technical notes

The copper channels support segments up to 100 m, while the 1300 nm multimode optical interfaces are published for distances up to 6400 m with the specified fiber. The DIN-rail aluminum enclosure is IP20 and is rated for 0 to 55 °C at 5 to 95% non-condensing humidity. Network acceptance should therefore document both the media budget and the cabinet environment.

FAQ View All FAQ

What role does Phoenix Contact FL SWITCH SF 14TX/2FX 2832593 perform?

Phoenix Contact FL SWITCH SF 14TX/2FX 2832593 performs the documented role of a unmanaged industrial ethernet switch within its approved system architecture.
What published value is associated with copper ports on FL SWITCH SF 14TX/2FX 2832593?

The published copper ports for FL SWITCH SF 14TX/2FX 2832593 is 14 RJ45 ports.
How does the documentation identify copper data rate for FL SWITCH SF 14TX/2FX 2832593?

Documentation identifies copper data rate for FL SWITCH SF 14TX/2FX 2832593 as 10/100 Mbps with auto negotiation and auto crossing.
Which value should be checked for copper segment length when servicing FL SWITCH SF 14TX/2FX 2832593?

Service personnel should check copper segment length against the documented value of 100 m maximum.

Where does FL SWITCH SF 14TX/2FX 2832593 fit in the published system?

Within the published architecture, FL SWITCH SF 14TX/2FX 2832593 functions as the unmanaged industrial ethernet switch described for the installed equipment.
Why must the complete FL SWITCH SF 14TX/2FX 2832593 marking be recorded?

Recording the complete marking prevents a different suffix, rating or hardware configuration from being substituted during maintenance.
When FL SWITCH SF 14TX/2FX 2832593 is replaced, what must technicians verify?

Technicians must verify the installed fiber ports, mating hardware, wiring and approved configuration before energization.
Which acceptance check completes work on FL SWITCH SF 14TX/2FX 2832593?

Commissioning is complete only after identity, wiring, diagnostics and every affected operating function have passed the approved checks.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.