Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 4000094-310
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 4000094-310
-
Manufacturer:Invensys
-
Product Category:DCS Systems
-
Spare Part Number:4000094-310
-
Estimated shipping dimensions:34x24x6cm
-
Weight:1.26 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Product role:Termination interface cable assembly
-
Cable family:4000094-x10
-
Published bend radius:5.6 in (14.224 cm)
-
Documented interface class:External termination products
-
Selection basis:Exact panel and ETA record
-
Routing control:Maintain the published minimum bend radius
Information
Overview
Manuals
Common Applications
Product Precautions
TRICONEX 4000094-310 forms a controlled signal path between selected external termination products and the corresponding Tricon cabinet interface.
- Belongs to the documented 4000094-x10 cable family
- Uses a published minimum bend radius of 5.6 inches (14.224 cm)
- Pairs with ETP 9653-610 and ETA 3000410-360 in one approved arrangement
- Supports selected 9662-series termination assemblies under exact mapping control
The manufacturer cross-reference associates this cable with several distinct ETP and ETA combinations, so the cable number alone does not make those panels interchangeable. Installation should follow the cabinet-specific panel identity, voltage class and point architecture while maintaining the stated routing radius and complete connector engagement.
Important Notice: Confirm the complete 4000094-310 identity, installed system record and approved companion hardware before replacement or commissioning.
TRICONEX 4000094-310 Manuals & Downloads
TRICONEX 4000094-310 Technical Reference (PDF)TRICONEX 4000094-310 Installation & Commissioning Guide (PDF)
The first document presents exact-model technical evidence, while the second organizes a separate controlled installation and commissioning workflow.
Installed Tricon systems
Controlled service where the approved system records explicitly identify 4000094-310.
Planned maintenance
Like-for-like inspection or replacement work that preserves the documented interface cable arrangement.
Lifecycle-managed spares
Exact-identity spare control for operating installations that retain the TRICONEX 4000094-310 designation.
Commissioning verification
Functional checks that confirm the recorded interface, configuration and diagnostics after 4000094-310 is installed.
Read the applicable TRICONEX instructions before work. Verify 4000094-310 and the installed system configuration before isolation or replacement.
1
Record the complete TRICONEX 4000094-310 marking and installed position before work.
2
Place the controller and affected process function in the approved safe maintenance state.
3
Verify the documented system version, companion hardware and interface assigned to 4000094-310.
4
Isolate the applicable controller and field energy in accordance with the approved procedure.
5
Inspect connectors, keys, cable assemblies and mechanical retention before installation.
6
Install 4000094-310 only in the recorded location without changing the approved architecture.
7
Restore power under control and confirm the specified indicators, communications and diagnostics.
8
Document the final identity, configuration and functional acceptance results before release.
Technical notes
For 4000094-310, the verified dataset records cable family as 4000094-x10 and published bend radius as 5.6 in (14.224 cm). These values must be applied only after the complete installed marking, cabinet record and approved system architecture have been reconciled.
FAQ View All FAQ
-
What function does TRICONEX 4000094-310 perform?TRICONEX 4000094-310 performs the documented role of a interface cable within the applicable installed-system architecture.
-
Which cable family is specified for 4000094-310?The manufacturer specifies the cable family for 4000094-310 as 4000094-x10.
-
How does the manufacturer define the published bend radius of 4000094-310?The manufacturer specifies the published bend radius for 4000094-310 as 5.6 in (14.224 cm).
-
What etp mapping applies to the TRICONEX 4000094-310?The manufacturer specifies the etp mapping for 4000094-310 as 9653-610 with ETA 3000410-360.
-
Where does 4000094-310 fit with respect to etp mapping?The manufacturer specifies the etp mapping for 4000094-310 as 9662-110 with ETA 3000570-310.
-
Why must the etp mapping be checked on 4000094-310?The manufacturer specifies the etp mapping for 4000094-310 as 9662-610 with ETA 3000520-390.
-
When replacing 4000094-310, which etp mapping must match the record?The manufacturer specifies the etp mapping for 4000094-310 as 9662-710 with ETA 3000550-390.
-
What does the manual state about the etp mapping for 4000094-310?The manufacturer specifies the etp mapping for 4000094-310 as 9662-810 with ETA 3000520-380.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.