The T3401 is an ICS Triplex Regent 24 Vdc Digital Input Module for the Regent system.
- Regent 24 Vdc Digital Input Module
- 16 discrete input channels
- 24 Vdc field signals; 8.7 mA nominal input current
- Regent I/O chassis and approved field termination
It senses sixteen discrete 24 Vdc field states and transfers voted logic-side data to the Regent Safetybus. It handles 24 Vdc on/off field-switch signals; 8.7 mA nominal input current and operates with Regent I/O chassis, field terminal blocks, processor modules and WINTERPRET configuration. Verify the exact hardware revision, matched termination and controlled application records before commissioning.
Important Notice: Use the complete T3401 code and verify the physical nameplate, current ICS Triplex / Rockwell Automation documentation, field wiring, project, and compatible system hardware before installation or replacement.
Apter Power T8431 Manuals and Guides
Important Notice: These are two separate Apter Power documents prepared from the official ICS Triplex source named in each document. Confirm the physical nameplate, current Rockwell Automation documentation, and applicable installation instructions before installation or replacement.
SIS process transmitters
Uses the T8431 trusted tmr 24 vdc analogue input module in a model-appropriate Trusted 8000 control or protection function.
Emergency shutdown sensing
Handles system status and diagnostics under the official engineering limits.
Fire and gas analogue inputs
Uses the T8431 trusted tmr 24 vdc analogue input module in a model-appropriate Trusted 8000 control or protection function.
Turbine protection auxiliaries
Handles system status and diagnostics under the official engineering limits.
Read Rockwell Automation ICSTT-RM273Q-EN-P and the applicable system installation instructions before use. Verify the physical nameplate, revision, slot and matched termination hardware.
1
Verify the exact model, hardware revision, firmware and nameplate before substitution.
2
Install only with T8100 or T8300 chassis, matching FTA, TMR processor and IEC 61131 TOOLSET; do not mix unmatched termination or base hardware.
3
De-energize or follow the approved live-insertion procedure and site safety plan before removal.
4
Preserve module keying, slot assignment, wiring polarity, shields, grounding and field power limits.
5
Complete application download, diagnostics, proof testing and functional acceptance before return to service.
Videos
News
Applications
