Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for PR6423/000-010 CON021
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for PR6423/000-010 CON021
-
Manufacturer:Emerson
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:PR6423/000-010 CON021
-
Estimated shipping dimensions:16x15x4cm
-
Weight:0.3 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Sensor:PR6423/000-010
-
Converter:CON021
-
Probe class:8 mm
-
Thread:M10 x 1
-
Armor:None
-
Sleeve length:25 mm
-
Cable length:5 m
-
Cable end:Lemo
-
Nominal scale factor:8 V/mm
-
Standard measuring range:2 mm
Information
Overview
Manuals
Common Applications
Product Precautions
Emerson EPRO PR6423/000-010 CON021 forms a non-contact 8 mm displacement channel for radial vibration or axial-position measurement.
- 8 mm probe system
- M10 x 1 unarmored body
- 25 mm sleeve length
- 5 m cable with Lemo end
The sensor, integral cable and panel converter operate as one calibrated chain. Correct gap, target alloy, cable routing and converter association are necessary for published linearity and scale factor.
Important Notice: Use PR6423/000-010 with its documented CON021 channel; the five-metre Lemo execution and 25 mm sleeve must remain distinct from nearby PR6423 codes.
Emerson PR6423/000-010 CON021 Manuals & Downloads
Emerson PR6423/000-010 CON021 Technical Reference (PDF)Emerson PR6423/000-010 CON021 Manufacturer Manual Excerpt (PDF)
The technical reference organizes exact characteristics and engineering boundaries. The manufacturer excerpt supplies the original product evidence used for exact-model review.
Sleeve-bearing radial vibration
Measures shaft motion relative to the bearing housing.
Axial position channels
Tracks thrust movement against a prepared ferromagnetic target.
Phase-reference measurements
Supplies a proximity signal where the installation design calls for one.
Panel converter renewal
Restores a PR6423 channel using the documented CON021 interface.
Emerson PR6423/000-010 CON021 installation checks: retain the exact identity, installed configuration and witnessed acceptance record throughout the work.
1
Verify PR6423/000-010 CON021 as one channel identity.
2
Record the 25 mm sleeve position, initial gap and five-metre cable route.
3
Stop the machine and isolate the monitoring input under the approved procedure.
4
Protect the probe tip, Lemo connector and cable from damage.
5
Inspect M10 threads, bracket rigidity and the target surface.
6
Reconnect only to the assigned CON021 converter input.
7
Set the initial gap within the documented linear range.
8
Prove static movement, polarity and dynamic vibration response before release.
Technical notes
For PR6423/000-010 CON021, retain the exact manufacturer identity, installed connection record and witnessed model-specific acceptance result.
FAQ View All FAQ
-
Which thread is specified for Emerson PR6423/000-010 CON021?The 000 sensor execution uses an M10 x 1 thread without armor.
-
What sleeve length is encoded by Emerson PR6423/000-010 CON021?The third base-code digit identifies a 25 mm sleeve.
-
How long is the cable on Emerson PR6423/000-010 CON021?The cable-order code identifies a five-metre cable.
-
Which connector ends the cable on Emerson PR6423/000-010 CON021?The final zero code specifies a Lemo connector.
-
What standard measuring range applies to Emerson PR6423/000-010 CON021?The matched PR6423 system uses a 2 mm standard range.
-
Which nominal scale factor applies to Emerson PR6423/000-010 CON021?The manufacturer specification lists 8 V/mm nominal sensitivity.
-
What installation record is essential for Emerson PR6423/000-010 CON021?Retain sleeve position, bracket location, initial gap, target material, cable route and converter assignment.
-
What proves correct operation of Emerson PR6423/000-010 CON021?Move the target through a controlled range, verify polarity and scale, then confirm the expected vibration signal at the monitor.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.