Which installed hardware must be paired with PR6426-010-140?

Use PR6426-010-140 with the documented Emerson PR6426 32 mm eddy-current measurement system components: PR6426-compatible converter, Rigid 80 x 40 mm mounting surface, Ten-metre armored route.

How should the Sensor family value for PR6426-010-140 be verified?

Confirm the complete nameplate and order code before work; the documented sensor family is PR6426.

What connection detail is critical when installing PR6426-010-140?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.

What configuration record should be retained when replacing PR6426-010-140?

Retain the as-found position, sleeve thread, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.

Can PR6426-010-140 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved Emerson PR6426 32 mm eddy-current measurement system configuration.

PR6426-010-140 PR6426 large-range eddy-current displacement sensor

Name: PR6426-010-140
Brand: Emerson
SKU: PR6426-010-140

PR6426-010-140

PR6426 large-range eddy-current displacement sensor

In Stock

Ships by Wednesday, October 14

Fast Shipping Available

Technical specifications for PR6426-010-140

Manufacturer:

Emerson

Product Category:

Machinery Monitoring System

Spare Part Number:

PR6426-010-140

Estimated shipping dimensions:

25x20x4.5cm

Weight:

0.85 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Sensor family:

PR6426

Sleeve thread:

None

Armor:

Yes

Mounting plate:

80 x 40 mm

Adapter plug:

Not included

Total cable length:

10 m

Cable end:

LEMO

Static nominal range:

+/-4.0 mm

Sensitivity:

2 V/mm

Nominal distance center:

Approximately 5.5 mm

Basic air gap:

1.2 to 1.8 mm

Operating temperature:

-35 to +150 degC

Vibration endurance:

5 g at 60 Hz

Information

Overview Manuals Common Applications Product Precautions

Emerson PR6426-010-140 is pr6426 large-range eddy-current displacement sensor. It senses shaft-to-probe displacement for a matched Emerson signal converter and machinery-monitoring channel.

Protects the large-range probe lead with armor
Provides a ten-metre system cable
Uses an 80 x 40 mm mounting plate
Requires separate documented adapter hardware

PR6426-010-140 operates with PR6426-compatible converter, Rigid 80 x 40 mm mounting surface, Ten-metre armored route, Installed adapter and LEMO connection.

Engineered applications include Remote large-gap position loops, Long-run expansion monitoring, Heavy-machine axial displacement, Armored actuator-position measurement.

Important Notice: Confirm the separate adapter, mounting-plate alignment, ten-metre armored route and PR6426 range; verify the complete large-gap response before enabling protection.

Apter Power PR6426-010-140 Manuals and Guides

Apter Power PR6426-010-140 Measurement-System Technical Reference PDF Apter Power PR6426-010-140 Installation, Loop Check and Acceptance Workbook PDF

The first document provides model-specific technical and measurement-system reference data. The second is a separate field workbook for mounting, wiring, commissioning and acceptance records.

Remote large-gap position loops

Measures large target movement at remote machine points.

Long-run expansion monitoring

Supports expansion channels with a protected ten-metre route.

Heavy-machine axial displacement

Observes axial displacement on heavy rotating equipment.

Armored actuator-position measurement

Provides non-contact position sensing in mechanically exposed installations.

Read the applicable Emerson machinery-monitoring instructions before work. Verify PR6426-010-140 and the installed Emerson PR6426 32 mm eddy-current measurement system configuration.

Verify the complete PR6426-010-140 order code, 80 x 40 mm mounting plate mounting interface and assigned PR6426 32 mm eddy-current system measuring point before work.

Place the monitored machine and its protection channel in the approved maintenance state before disturbing PR6426-010-140.

Protect the probe tip from impact and keep the mounting thread and bracket free from burrs or contamination.

Route the 10 m sensor lead without sharp bends, crushing, tensile load or contact with hot and moving surfaces.

Keep the LEMO or open-end connection clean, dry and fully identified before reconnecting the measurement loop.

Confirm the paired signal converter or monitor input, cable length and target material match the documented measuring chain.

Set the static gap within the documented linear region while preserving shaft and probe mechanical clearance.

Prove polarity, static gap, dynamic response and alarm action before returning the protection channel to service.

FAQS

What measurement or system function does PR6426-010-140 perform?

PR6426-010-140 is a pr6426 large-range eddy-current displacement sensor. It senses shaft-to-probe displacement for a matched Emerson signal converter and machinery-monitoring channel.
Which installed hardware must be paired with PR6426-010-140?

Use PR6426-010-140 with the documented Emerson PR6426 32 mm eddy-current measurement system components: PR6426-compatible converter, Rigid 80 x 40 mm mounting surface, Ten-metre armored route.
How should the Sensor family value for PR6426-010-140 be verified?

Confirm the complete nameplate and order code before work; the documented sensor family is PR6426.
What connection detail is critical when installing PR6426-010-140?

Preserve every conductor, connector and shield identity, then follow the model-specific connection arrangement described in the controlling Emerson document.
How is PR6426-010-140 mechanically installed without changing measurement behavior?

Protect the probe tip from impact and keep the mounting thread and bracket free from burrs or contamination.
What commissioning test should be completed for PR6426-010-140?

Prove polarity, static gap, dynamic response and alarm action before returning the protection channel to service.
What configuration record should be retained when replacing PR6426-010-140?

Retain the as-found position, sleeve thread, cable or channel identity, gap or scaling value, diagnostics and final functional-test result.
Can PR6426-010-140 replace a similar Emerson model without engineering review?

No direct substitution should be assumed; verify the full order code, measuring function, interface, cable or channel arrangement and the approved Emerson PR6426 32 mm eddy-current measurement system configuration.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

PR6426-010-140

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for PR6426-010-140

Technical specifications for PR6426-010-140

Information

Information