How are the outputs grouped on GE IC697MDL340?

The sixteen points are divided into four isolated groups of four outputs.

What is the steady-state point rating of GE IC697MDL340?

Each output point is rated for 2 A at 120 VAC, subject to the group and thermal limits.

What is the combined current limit for one GE IC697MDL340 group?

The four outputs in a group are limited to 4 A total.

Which fuse protects each GE IC697MDL340 group?

Each group uses a 10 A slow-acting fuse; the manual identifies Bussmann MDA-10 or Littelfuse 326010.

Can GE IC697MDL340 switch inductive loads?

Yes. Its high-inrush design supports solenoids, relays and many contactors when the duty cycle remains within the published limits.

What does the GE IC697MDL340 FUSE LED indicate?

It illuminates when the open-fuse detector senses a failed internal group fuse.

How is GE IC697MDL340 configured?

The I/O references and fault response are assigned in the Series 90-70 programming software; the module has no configuration DIP switches.

What should be tested after replacing GE IC697MDL340?

Exercise all sixteen commands, verify load voltage, confirm group current, check the point LEDs and simulate the selected fault-state behavior.

IC697MDL340

AC Output Module

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

GE IC697MDL340 is a Series 90-70 discrete output module with four groups of four points. Each point is rated for 2 A steady-state service, while group loading and inrush duty remain subject to the manual limits.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for IC697MDL340

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for IC697MDL340

Manufacturer:

General Electric
Product Category:

PLC Systems
Estimated shipping dimensions:

4x21.8x29.3cm
Weight:

0.62 kg
Tariff Code:

8537101190
Counliy of origin:

USA
Product family:

Series 90-70
Output type:

120 VAC discrete output
Output count:

16 points
Grouping:

4 isolated groups of 4
Point capacity:

2 A steady-state
Group capacity:

4 A maximum
Group fuse:

10 A slow-acting
Status indication:

Point LEDs and FUSE LED

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

GE IC697MDL340 organizes sixteen source-controlled AC outputs so separate groups can operate from different phases of a 120 VAC system. Point LEDs, an open-fuse indication and the removable terminal board support commissioning and maintenance without changing the configured I/O references.

16 output points arranged as four groups of four
120 VAC, 2 A point rating
10 A slow-acting fuse for each group
High-inrush capability for inductive and incandescent loads

The engineered signal path is Series 90-70 backplane command → IC697MDL340 logic and isolation → Four fused AC output groups → Contactors, solenoids or indicator loads. Commission each boundary against the controlled project record.

Important Notice: De-energize the rack and every field supply before removing the module or terminal board.

GE IC697MDL340 Manuals & Downloads

GE IC697MDL340 Technical Reference (PDF)GE IC697MDL340 Installation & Commissioning Guide (PDF)

The Technical Reference is a model-specific official GE manual excerpt. The separate Installation & Commissioning Guide organizes field preparation, verification and acceptance for GE IC697MDL340.

Contactor control

Handles the inrush profile of many industrial contactor coils.

Solenoid actuation

Switches grouped 120 VAC solenoid circuits within point and group limits.

Indicator lighting

Drives incandescent or other AC indication loads with duty-cycle review.

Multi-phase grouped outputs

Lets isolated groups use different phases when wiring follows the module diagram.

Apply these controls specifically to GE IC697MDL340 before isolation, replacement, reconnection, energization and final release.

De-energize the rack and every field supply before removing the module or terminal board.

Keep each four-point group at or below the documented 4 A combined load.

Use only the specified 10 A slow-acting replacement fuse for a group circuit.

Account for load inrush and repetition rate rather than sizing only from steady-state current.

Maintain separation between group hot and neutral conductors when different phases are used.

Verify the mechanical key before inserting a replacement IC697MDL340.

Support the terminal-board wire bundle so it does not pull on the hinged door or connector.

After commissioning, prove every point LED, the FUSE indication and the commanded safe state for a controller fault.

Technical notes

GE IC697MDL340 provides sixteen 120 VAC output points in four isolated and individually fused groups for Series 90-70 field loads.

FAQ View All FAQ

How are the outputs grouped on GE IC697MDL340?

The sixteen points are divided into four isolated groups of four outputs.
What is the steady-state point rating of GE IC697MDL340?

Each output point is rated for 2 A at 120 VAC, subject to the group and thermal limits.
What is the combined current limit for one GE IC697MDL340 group?

The four outputs in a group are limited to 4 A total.
Which fuse protects each GE IC697MDL340 group?

Each group uses a 10 A slow-acting fuse; the manual identifies Bussmann MDA-10 or Littelfuse 326010.

Can GE IC697MDL340 switch inductive loads?

Yes. Its high-inrush design supports solenoids, relays and many contactors when the duty cycle remains within the published limits.
What does the GE IC697MDL340 FUSE LED indicate?

It illuminates when the open-fuse detector senses a failed internal group fuse.
How is GE IC697MDL340 configured?

The I/O references and fault response are assigned in the Series 90-70 programming software; the module has no configuration DIP switches.
What should be tested after replacing GE IC697MDL340?

Exercise all sixteen commands, verify load voltage, confirm group current, check the point LEDs and simulate the selected fault-state behavior.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.