Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for IC697HSC700
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for IC697HSC700
-
Manufacturer:General Electric
-
Product Category:PLC Systems
-
Spare Part Number:IC697HSC700
-
Estimated shipping dimensions:3.5x13.5x13.5cm
-
Weight:0.35 kg
-
Tariff Code:8537101190
-
Counliy of origin:USA
-
Module voltage:5 VDC from backplane
-
Input count:12
-
Counter types:Five selectable types
-
Maximum rate:200 kHz; 800 kHz for Type E A-quad-B
-
Input thresholds:TTL, 10–30 V non-TTL, 400 mV magnetic pickup
-
Output count:4 positive-logic outputs
-
Output supply:5 VDC or 10–30 VDC user supply
-
Terminal connector:40-position removable strip
Information
Overview
Manuals
Common Applications
Product Precautions
GE IC697HSC700 performs count, frequency and position functions locally so pulse processing is not limited by the controller scan. Its removable forty-terminal strip carries twelve input circuits, an external oscillator connection, encoder power and four fused source outputs.
- 200 kHz counting for Types A–D
- 800 kHz Type E A-quad-B operation
- 12 single-ended or differential inputs
- Four optically isolated positive-logic outputs
The engineered signal path is Encoder or pulse source → IC697HSC700 local counter engine → Preset and output logic → Four field outputs plus PLC result data. Commission each boundary against the controlled project record.
Important Notice: Power down the rack and every field source before inserting or removing IC697HSC700.
GE IC697HSC700 Manuals & Downloads
GE IC697HSC700 Technical Reference (PDF)GE IC697HSC700 Installation & Commissioning Guide (PDF)
The Technical Reference is a model-specific official GE manual excerpt. The separate Installation & Commissioning Guide organizes field preparation, verification and acceptance for GE IC697HSC700.
Turbine flow measurement
Counts high-rate pulses independently of the PLC program scan.
Velocity measurement
Derives speed from encoder or proximity-pulse inputs.
Material handling
Tracks parts, position and cut-length events with local presets.
Motion and process control
Uses four hardware outputs for low-latency counter actions.
Apply these controls specifically to GE IC697HSC700 before isolation, replacement, reconnection, energization and final release.
1
Power down the rack and every field source before inserting or removing IC697HSC700.
2
Select TTL, non-TTL or magnetic-pickup thresholds to match the actual sensor circuit.
3
Use shielded input cable and observe the documented 30 m maximum length.
4
Connect magnetic pickups only to inputs 1 through 4.
5
Include encoder current and energized-output current in the backplane-load calculation.
6
Protect the output supply and replace the common 5 A fuse only with the specified type.
7
Do not exceed 30 VDC or 1 A per output when using the 10–30 VDC output supply.
8
After configuration, verify count direction, scaling, reset/gate inputs, preset actions and all four output states.
Technical notes
GE IC697HSC700 processes rapid pulse inputs independently of the PLC scan and controls four isolated positive-logic outputs for Series 90-70 applications.
FAQ View All FAQ
-
What is the maximum count rate of GE IC697HSC700?Types A–D and Type E up/down operate to 200 kHz; Type E A-quad-B operation supports up to 800 kHz.
-
How many field inputs are available on GE IC697HSC700?The module provides twelve inputs that can be wired single-ended or differentially.
-
Which GE IC697HSC700 inputs accept magnetic pickups?Magnetic-pickup thresholds are available on inputs 1 through 4.
-
What input voltage classes does GE IC697HSC700 support?It supports 5 V TTL, 10–30 V non-TTL and 400 mV magnetic-pickup inputs.
-
How many local outputs does GE IC697HSC700 provide?Four optically isolated positive-logic outputs are available at the removable terminal strip.
-
Can GE IC697HSC700 count without continuous CPU interaction?Yes. It senses inputs, processes count data and controls outputs locally, then exchanges data with the PLC.
-
What encoder supply is available from GE IC697HSC700?A built-in 5 VDC output provides up to 500 mA at 40 °C or 300 mA at 60 °C.
-
Which checks complete GE IC697HSC700 commissioning?Confirm input threshold selection, count direction, frequency limit, preset behavior, output supply, fuse status and PLC data mapping.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.