-
Match the complete marking
Provide the complete 40113-02 marking, installed-position photographs and all companion-component identities used by the current arrangement.
-
Check the offered item before ordering
Compare the offered 40113-02 execution, connections and included items with the approved drawing and manufacturer documentation before ordering.
Technical specifications for 40113-02
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:40113-02
-
Weight:0.84 kg
-
Tariff Code:8537101190
-
Accessory type:3300 XL connector protector kit
-
Compatible connection:3300 XL probe to extension-cable ClickLoc joint
-
Included function:Environmental protection of mated connectors
-
Kit scope:Connector protectors and installation tools
-
Typical system use:3300 XL proximity-probe installations
-
Installation sequence:Mate clean ClickLoc connectors before fitting protectors
-
Connector handling:Finger-tight connection; no twisting of the cable
-
Protection boundary:Does not replace approved cable routing or sealing design
-
Related male protector:03839410
-
Related female protector:03839420
-
Related protector pair pack:40180-02
-
Retrofit adapter reference:136536-01 for earlier protector-kit compatibility
Information
- 40113-02 groups the matched connector protectors and installation tools used to protect 3300 XL probe-to-extension cable joints from environmental exposure.
Matched male-and-female interface: Kit components fit the documented 3300 XL probe and extension-cable connection geometry.
Service installation support: Included tools help fit the protectors without twisting or loading the sensing cable.
Protection is fitted after the clean male and female connectors are fully seated. Cable routing, bend radius, strain relief and process sealing remain separate engineering controls and must not be inferred from the protector alone.
Acceptance includes kit identity, correct male/female orientation, undamaged protector surfaces, complete coverage of the joint and confirmation that the cable remains unloaded and within the approved bend radius.
40113-02 Official Datasheet Excerpt
Bently Nevada 3300 XL Transducer Accessories Datasheet 145668 Rev. L. Selected original pages covering the applicable product identity, technical data and system relationship.40113-02 Installation & Verification Guide
Model-specific field guide for identity capture, installed-fit checks, controlled replacement, commissioning and handover.
Application scope: Use 40113-02 on compatible 3300 XL ClickLoc joints where the approved installation requires additional environmental protection.
Probe-to-extension joints
Protect the mated ClickLoc interface in compatible 3300 XL transducer systems.Contaminated machine areas
Reduce connector exposure to liquids and debris after the connection is clean and seated.Field maintenance replacement
Refit protection after continuity and stable channel response have been confirmed.Legacy protector adaptation
Review the documented adapter where an earlier protector-kit execution must interface with XL connectors.
Confirm the exact probe and extension-cable connector generation before installation.
Do not trap oil, moisture or debris inside the protector.
Make the finger-tight electrical connection before sliding the protector into position.
Hold connector bodies and keep torsion away from the probe and extension leads.
Do not force the protected joint into a bend or unsupported load.
Confirm full coverage, mechanical freedom and stable transducer-channel response.
Alternative Names
Technical notes
Exact configuration: 3300 XL connector protector kit with protectors and installation tools
Application boundary: For compatible 3300 XL probe and extension-cable ClickLoc joints; not a substitute for approved routing or process sealing
Technical reference: Bently Nevada 3300 XL Transducer Accessories Datasheet 145668 Rev. L
FAQ View All FAQ
-
Which connection is protected by 40113-02?It protects the compatible 3300 XL probe-to-extension cable ClickLoc joint after the male and female connectors are mated.
-
What is included in 40113-02?The manufacturer identifies the kit as connector protectors plus the installation tools required for fitting them.
-
When should 40113-02 be installed?Clean and mate the ClickLoc connectors first, verify the connection, then fit the protector without twisting the cable.
-
Does 40113-02 replace process sealing?No. The kit protects the electrical connector joint; machine-case sealing, conduit and cable-gland requirements remain separate.
-
How is male-and-female orientation checked for 40113-02?Match each protector half to the probe and extension-cable connector bodies and confirm full coverage without forcing the parts.
-
Can 40113-02 be fitted over a contaminated joint?No. Remove oil, moisture and debris, inspect the contacts and establish the clean electrical connection before covering it.
-
What cable condition should be checked with 40113-02?Confirm strain relief, bend radius and connector alignment so the protector is not carrying cable weight or side load.
-
What is the final acceptance check for 40113-02?Verify correct kit identity, complete connector coverage, unrestricted cable routing and stable operation of the restored transducer channel.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.





