-
Match the complete marking
Include the complete 330703-000-050-10-11-05 marking and photographs of the installed connection and mounting position.
-
Check the offered item before ordering
Request available-unit label and connector photographs. Have your maintenance team compare the offered 330703-000-050-10-11-05 with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 330703-000-050-10-11-05
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:330703-000-050-10-11-05
-
Weight:0.1 kg
-
Tariff Code:8537101190
-
Probe family:3300 XL 11 mm
-
Mounting thread:M14 x 1.5
-
Armor:Without armor
-
Unthreaded length:0 mm
-
Overall case length:50 mm
-
Total probe length:1.0 m
-
Connector and cable option:11 - ClickLoc with protector, FluidLoc cable
-
Agency approval option:05 - Multiple approvals
-
System linear range:4.0 mm (160 mils)
-
System scale factor:3.94 V/mm (100 mV/mil)
-
Recommended gap:2.5 mm (100 mils)
-
Frequency response:0 to 8 kHz, +0/-3 dB typical
-
Probe material:PPS tip; AISI 304 stainless-steel case
-
Recommended case torque:21.1 N m for M14 x 1.5
-
Minimum cable bend radius:25.4 mm
-
Probe temperature:-52 to +177 deg C
Information
- The complete order code identifies an M14 x 1.5 standard-mount 11 mm probe with a 50 mm case, 1.0 m FluidLoc lead and connector protector.
Fluid-control cable path: FluidLoc construction reduces migration through the probe lead in oil-exposed machinery locations.
Metric machine interface: The M14 x 1.5 case supports documented metric probe ports while retaining a finger-tight ClickLoc connection.
Option 11 combines a miniature coaxial ClickLoc connector, connector protector and FluidLoc cable. The 1.0 m probe lead is used in a matched 3300 XL 11 mm chain with the appropriate extension cable and Proximitor Sensor.
Published range, scale and frequency values apply to the complete calibrated 11 mm system under the stated target, gap, supply and temperature conditions. Commissioning therefore compares gap voltage, runout and monitor indication after the whole channel is restored.
330703-000-050-10-11-05 Official Datasheet Excerpt
Bently Nevada 3300 XL 11 mm Proximity Transducer System Datasheet 146256 Rev. T. Selected original pages covering the applicable product family, technical data and ordering information.330703-000-050-10-11-05 Installation & Verification Guide
Apter Power field guide covering identity capture, installed relationships, controlled replacement, commissioning and handover.
Application scope: Use it for non-contacting radial vibration or axial-position measurement where the documented 11 mm system range and target geometry are required.
Long-range shaft displacement
Use the 4.0 mm system range where an 8 mm transducer does not provide sufficient travel.Metric bearing-housing ports
Match the M14 x 1.5 thread and allowable engagement with the installed probe mounting.Oil-exposed probe routing
Use the FluidLoc lead where process fluid migration through the cable core must be controlled.Matched-system service
Retain the 11 mm probe, extension cable and Proximitor Sensor identities as one calibrated chain.
Confirm 000, 050, 10, 11 and 05 against the installed marking.
Do not exceed the documented 21 mm engagement limit for M14 x 1.5.
Prevent impact, metal chips and side loading on the 11 mm tip.
Route the lead without bends tighter than 25.4 mm or load on the connector.
Establish the operating point with the matched system energized and the approved target.
Compare gap, runout, vibration or position response with the accepted baseline.
Alternative Names
Technical notes
Exact configuration: M14 x 1.5 standard-mount probe, 0 mm unthreaded length, 50 mm case, 1.0 m FluidLoc lead, connector protector and multiple-approval option
System boundary: Published performance belongs to a matched 3300 XL 11 mm probe, extension cable and Proximitor Sensor under the stated calibration conditions
Technical reference: Bently Nevada 3300 XL 11 mm Proximity Transducer System Datasheet 146256 Rev. T
FAQ View All FAQ
-
Why does 330703-000-050-10-11-05 use the 11 mm transducer family?The 11 mm family provides a 4.0 mm linear range and 3.94 V/mm scale factor for applications needing more travel than the 8 mm system.
-
How should the M14 x 1.5 mounting port be checked for 330703-000-050-10-11-05?Confirm thread condition, available 50 mm case depth and no more than 21 mm thread engagement before installation.
-
What does option 11 change on 330703-000-050-10-11-05?It selects a miniature ClickLoc connector with protector and a FluidLoc probe cable.
-
Which Proximitor system length matches 330703-000-050-10-11-05?The 1.0 m probe lead must be combined with the selected extension cable so the total electrical length matches the 11 mm Proximitor Sensor.
-
How is the operating point established for 330703-000-050-10-11-05?Use the approved AISI 4140 target and set the matched system near the documented 2.5 mm recommended gap while observing live gap voltage.
-
What cross-talk check is relevant to 330703-000-050-10-11-05?Review target diameter, shaft diameter and spacing to adjacent probes; below the recommended geometry, reduce gap only within the required measurement range.
-
Can 330703-000-050-10-11-05 be evaluated as a probe alone?Mechanical identity can be checked alone, but published range, scale and linearity apply to the complete matched 11 mm transducer chain.
-
What should be recorded before removing 330703-000-050-10-11-05?Record full marking, insertion position, locknut datum, cable route, companion extension cable and Proximitor Sensor, gap voltage and baseline response.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
330703-000-050-10-11-05Product Details -
330908-00-20-10-02-05Product Details -
330104-00-04-10-02-00Product Details -
330905-00-08-05-02-05Product Details -
330104-00-24-10-02-00Product Details -
330104-10-19-10-02-00Product Details -
330103-00-19-10-12-05Product Details -
330104-00-06-10-02-05Product Details -
330104-04-10-05-01-00Product Details -
330103-17-22-10-12-05Product Details
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.







