With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
3300 XL 5/8mm Proximitor Sensor
15-meter system length,delivers
precise linear voltage output for
non-contact shaft vibration and displacement monitoring
The 330180-X1-05 MOD:145193-15 is a 3300 XL series eddy current Proximitor Sensor supporting a 5.0-meter loop length, dedicated to the radial vibration, displacement, and speed monitoring of large rotating machinery.
One 3300 XL 8 mm probe
One 3300 XL extension cable
One 3300 XL Proximitor Sensor
The 330180-X1-05 MOD:145193-15 Proximitor Sensor is based on the premium Bently Nevada 3300 XL 8 mm system platform. The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
The standard 3300 XL 8 mm 5-meter system fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability. Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable with other non-XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330180-X1-05 MOD:145193-15 Proximitor Sensor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Hydropower Generation
In massive hydro-generator units where physical distances are immense, the 15-meter system allows the Proximitor to be mounted in a remote centralized junction box, far from the shaft, to monitor turbine shaft runout and thrust bearing axial displacement.
Offshore Oil & Gas Platforms
Due to compact platform footprints and strict hazardous zoning, Proximitors must be installed in safe areas far from explosive risks (e.g., outside the deck machine room). The 15-meter system delivers long-distance transmission of gas export compressor shaft vibration.
Nuclear Power Generation
High radiation and harsh conditions exist inside the containment vessel. The 15-meter extended system allows the Proximitor to be cross-zoned into low-radiation electrical cabinets outside the containment, enabling remote vibration monitoring of the main coolant pump.
Iron & Steel / Integrated Metallurgy
Blast furnace shops present high temperatures and extreme dust. The 15-meter system moves the Proximitor to an air-conditioned control room far from the furnace body, providing remote monitoring for blast furnace blowers and TRT units.
Wind Power and Renewable Energy
In high-capacity offshore wind turbines during test-bench R&D or special configurations, it spans long internal nacelle distances to monitor the non-contact dynamic clearance and vibration of wind turbine gearbox main shafts and generators.
When using the 330180-X1-05 MOD:145193-15 Proximitor, the total system electrical length across the probe, extension cable, and sensor must match strictly to prevent signal distortion. During installation, insulate the Proximitor base from the cabinet ground and keep coaxial connectors clear of metal surfaces to eliminate ground loop interference, while maintaining a dry interface within an operating environment of -34°C to +100°C.
The Bently Nevada 330180-X1-05 MOD:145193-15 is a 3300 XL Proximitor Sensor factory-calibrated for a custom 15-meter total system length. Featuring global Intrinsic Safety certifications (-05 suffix), it converts non-contact shaft vibration and displacement into a standard 200 mV/mil (7.87 V/mm) linear voltage output, specifically engineered for remote wiring in hazardous industrial environments.
What type of product is 330180-X1-05 MOD:145193-15?
This is a Bently Nevada 3300 XL series eddy current Proximitor Sensor, featuring a special factory modification designated as 145193-15.
What is the primary purpose of 330180-X1-05 MOD:145193-15?
It is used to receive radio frequency signals from an eddy current probe and convert them into dynamic and static negative DC voltage signals proportional to the distance between the probe tip and the target metal surface, thereby monitoring machinery vibration and displacement.
What equipment does 330180-X1-05 MOD:145193-15 need to work with?
It must be used in conjunction with a compatible Bently Nevada 3300 XL eddy current probe, an extension cable, and a backend monitoring rack (such as the 3500 system) or a DCS.
What is the operating principle of 330180-X1-05 MOD:145193-15?
It supplies high-frequency AC to the probe coil to generate a magnetic field. When a metal shaft approaches, the field weakens, causing impedance changes inside the Proximitor, which then conditions this change into a precise analog voltage signal.
What is the signal output sensitivity of the 330180-X1-05 MOD:145193-15 Proximitor?
As part of the standard 3300 XL 8mm/5mm system, its output sensitivity has a nominal value of 7.87 V/mm (200 mV/mil).
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
