With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330104-00-06-05-01-CN is a 3300 XL 8 mm Proximity Probe manufactured by Bently Nevada. Its specific hardware configuration features an M10 × 1 metric thread with a 0 mm unthreaded length and an overall case length of 60 mm. The probe comes with a 0.5-meter integral cable which is protected by stainless steel cable armor, and this specific model has obtained China-specific hazardous area agency approvals denoted by the -CN suffix.
One 3300 XL 8 mm probe
One 3300 XL extension cable
One 3300 XL Proximitor Sensor
The system provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements. The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems]. The standard 3300 XL 8 mm 5-meter system also fully complies with the American Petroleum Institute’s (API) 670 Standard for mechanical configuration, linear range, accuracy, and temperature stability.
All 3300 XL 8 mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components. Each 3300 XL 8 mm Transducer System component is backward compatible and interchangeable with other non-XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe, for applications in which an 8 mm probe is too large for the available mounting space.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330104-00-06-05-01-CN Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Thermal Power Generation
Monitoring the radial shaft vibration of high-pressure rotors in large steam turbine generators to capture mechanical faults like unbalance, misalignment, or bearing wear in real time.
Nuclear Power Industry
Installed on main feed pumps and large saturated steam turbines in nuclear secondary loops to precisely monitor axial shaft thrust, ensuring extreme safety of critical nuclear assets.
Hydroelectric Power
Used for measuring the runout (radial vibration) of upper guide, lower guide, and water guide bearings in large vertical hydro-generator units to prevent stator-rotor rubbing caused by shaft wobbling.
Oil & Gas Upstream
Applied on large centrifugal gas export compressors on offshore drilling platforms or onshore gathering stations, working with monitoring systems to provide long-term machinery health ratings.
Iron, Steel & Metallurgy
Used for online condition diagnostics of fluid-film bearings in blast furnace blowers and Top Gas Energy Recovery Turbines (TRT), ensuring wind supply safety for high-intensity continuous smelting.
Air Separation & Industrial Gases
Installed on the main air compressor (MAC) and centrifugal oxygen/nitrogen boosters in large air separation units (ASU) to monitor high-speed rotor stability.
During operation, 330104-00-06-05-01-CN requires strict control of the installation gap to ensure it remains within the 2.0 mm linear range, and sharp bending or excessive pulling of the armored cable must be avoided. The probe tip must clear surrounding metals to prevent electromagnetic interference, the connector junction requires insulating sleeves to avoid ground loop faults, and its "-CN" explosion-proof installation must strictly comply with China's national electrical standards for hazardous areas.
330104-00-06-05-01-CN features a 60 mm fully threaded case and a 0.5-meter stainless steel armored cable. This hardware supports a 2.0 mm full-scale linear displacement measurement, provides a standard voltage output sensitivity of 7.87 V/mm, and integrates TipLoc and CableLoc securing technologies at the probe tip and connector junction. Complying with China-specific hazardous area agency approvals (-CN), it is suitable for shaft vibration and axial displacement monitoring of large and medium rotating machinery in Zone 0 or Zone 1 hazardous environments within petrochemical and power generation industries.
It is a Bently Nevada 3300 XL series 8 mm metric threaded non-contact eddy current proximity probe, used to measure shaft vibration and axial displacement of large rotating machinery.
What are the thread specifications and case length of 330104-00-06-05-01-CN?
This model is configured with an M10 x 1 metric thread, an unthreaded length of 0 mm (fully threaded case), and an overall case length of 60 mm.
What is the measurement principle of 330104-00-06-05-01-CN?
The coil at the probe tip generates an alternating magnetic field that induces eddy current losses on the observed metal surface; it measures the distance by monitoring this change in electromagnetic impedance.
How much linear measurement range does 330104-00-06-05-01-CN provide?
It provides a full-scale linear measurement range of 2.0 mm (80 mils), which satisfies the vibration monitoring requirements of most standard industrial bearings.
What physical protection does the cable of 330104-00-06-05-01-CN have?
This model is configured with the -01 option, meaning its 0.5-meter highly flexible integral coaxial cable is fully encased in a stainless steel braided armored conduit to prevent field mechanical wear.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
