With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330103-00-06-50-02-RU is a standard configuration of the Bently Nevada 3300 XL 8 mm eddy-current proximity probe, featuring a 60 mm probe body and 5 m standard cable, with CSA / ATEX / IECEx approval options. This model is designed for high-precision shaft displacement and vibration measurements, and is fully compatible with 3300 XL series Proximitor sensors and extension components.
High-Precision
Long-Cable Compatible
Certified & Safe
This model offers a typical linear measurement range of 0.25–2.3 mm with a frequency response up to 10 kHz, capturing both static and dynamic vibration data. The probe is temperature-resistant (‑52 °C to +177 °C), constructed from PPS and stainless steel, and equipped with a 75 Ω coaxial standard cable to ensure long-term reliability. Its interchangeable design allows for rapid installation and system upgrades while maintaining stable, high-precision output.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330103-00-06-50-02-RU 8 mm Proximity Probes Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Power Generation Used in steam and gas turbines to monitor shaft displacement and vibration. Provides critical condition data to prevent premature wear or failures. Supports predictive maintenance and real-time machine protection.
Oil & Gas
Provides reliable binary control for high-safety offshore and onshore processing units.
Petrochemical
Used on centrifugal and axial pumps in chemical processing units. Detects shaft displacement and vibration to avoid cavitation, bearing damage, or pump failure. Helps maintain process stability and product quality.
Marine Engineering
Applied to shipboard turbines and generators for propulsion and auxiliary systems. Provides non-contact vibration and position measurements for reliable operation in harsh marine environments. Meets classification society safety standards.
Aerospace & Aviation
Monitors high-speed rotating machinery in aircraft auxiliary power units (APU) and test rigs. Ensures precise shaft alignment and early detection of imbalance, improving operational safety. Suitable for extreme temperature and vibration conditions.
Industrial Manufacturing
Installed on high-speed gearboxes, fans, and motors in heavy industry. Tracks rotor vibration and displacement to reduce unplanned downtime. Supports predictive maintenance and enhances overall plant efficiency.
The 3300 XL 8 mm Proximity Transducer System provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface, enabling accurate measurement of both static (position) and dynamic (vibration) values. This fundamental operating principle ensures the transducer system delivers reliable distance and vibration signals in a wide range of industrial monitoring applications. The components — probe, extension cable, and Proximitor sensor — are fully interchangeable and backward compatible with legacy 3300-series systems, eliminating the need to match or bench calibrate individual parts during installation and maintenance.
The 330103‑00‑06‑50‑02‑RU is a standard configuration of the Bently Nevada 3300 XL 8 mm eddy‑current proximity transducer, designed for precise shaft displacement and vibration measurement.
What is the linear measurement range of 330103‑00‑06‑50‑02‑RU?
It has a typical linear measurement range of 0.25 – 2.3 mm (reference gap approx. 1.27 mm), where output voltage is proportional to distance.
Does 330103‑00‑06‑50‑02‑RU support hazardous area approvals?
The RU suffix indicates the configuration includes hazardous‑area approval options such as CSA, ATEX, and IECEx.
330103‑00‑06‑50‑02‑RU 需要配合什么设备使用？
It must be used in conjunction with a 3300 XL Proximitor sensor and, if needed, extension cable assemblies to produce valid output signals.
What is the interchangeability of 330103‑00‑06‑50‑02‑RU?
3300 XL probes, extension cables, and sensors are interchangeable and compatible with legacy 3300 series, eliminating the need for individual matching or calibration.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
