Bently Nevada 330102-00-80-10-01-05 is an evidence-bounded configured 3300 XL 8 mm proximity probe. Exact model identity is documented by the cited manufacturer source.
- Exact requested identity: 330102-00-80-10-01-05
- Product class: configured 3300 XL 8 mm proximity probe
- Probe family: 330102
- Thread: 3/8-24 UNF
System role: It is a configured 3300 XL 8 mm proximity probe with 3/8-24 UNF thread and stainless-steel armor. Only facts stated by the cited Baker Hughes / Bently Nevada material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Use only with the matching 3300 XL 8 mm extension cable and Proximitor sensor so the documented system length and electrical calibration are preserved. The full five-field ordering code is configuration-specific; do not merge it with another case length, connector, cable or approval option. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete Bently Nevada 330102-00-80-10-01-05 physical label and installed-system documentation before use.
Apter Power 330102-00-80-10-01-05 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited manufacturer official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current manufacturer documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for Bently Nevada 330102-00-80-10-01-05.
System documentationProvides a source-traceable boundary for the documented Bently Nevada 3300 XL 8 mm proximity transducer system configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact Baker Hughes / Bently Nevada documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete Bently Nevada 330102-00-80-10-01-05 label, revision and installed-system documentation before use.
2The full five-field ordering code is configuration-specific; do not merge it with another case length, connector, cable or approval option.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
