With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 330101-00-16-10-11-RU is a standard Bently Nevada 3300 XL 8 mm eddy‑current proximity probe model, engineered for high-precision shaft displacement and vibration measurement. This configuration features a mini ClickLoc connector, 1 m overall length, and includes CSA/ATEX/IECEx approvals, making it ideal for online monitoring and protection of industrial rotating machinery.
High-Precision
Certified & Safe
Series Compatible
This model offers a typical linear measurement range of 0.25–2.3 mm with a frequency response up to 10 kHz, ensuring accurate capture of both static and dynamic vibration. The probe is temperature-resistant (‑52 °C to +177 °C) with optional extended cables for long-term stable operation. Its metallic probe and high-performance eddy-current technology provide reliability and consistency, while remaining fully compatible with all 3300 XL series Proximitor sensors and extension components.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 330101-00-16-10-11-RU 8 mm Proximity Probes Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Power Generation
Used in steam and gas turbines at power plants to monitor rotor displacement and vibration. Detects shaft misalignment, unbalance, or bearing wear early, preventing forced outages.
Oil & Gas
Installed on compressors, pumps, and turboexpanders in oil refineries and gas processing plants. Measures shaft vibration and position to protect high-speed rotating equipment from mechanical failure.
Petrochemical
Applied to centrifugal and axial pumps in chemical processing units. Monitors rotor displacement and vibration to avoid cavitation, misalignment, and pump failure. Helps maintain process stability and product quality.
Marine Engineering
Used on shipboard turbines and generators for propulsion and auxiliary systems. Provides non-contact vibration and position data for high-reliability operation under harsh marine conditions.
Aerospace & Aviation
Monitors high-speed rotating machinery in aircraft auxiliary power units and test rigs. Ensures precise shaft alignment and early detection of imbalance, enhancing operational safety.
Industrial Manufacturing
Installed on high-speed gearboxes, fans, and motors in heavy industry. Tracks rotor vibration and displacement to prevent equipment downtime.
The 3300 XL 8 mm Proximity Transducer System consists of an 8 mm probe, one extension cable, and one Proximitor sensor, where the output voltage is directly proportional to the distance between the probe tip and the conductive target, enabling both static and dynamic measurements. The key operational principle is maintaining the probe‑to‑target gap within the linear range so that the output signal remains proportional to target distance. Components are fully interchangeable, eliminating the need for matching or bench calibration of individual parts, which facilitates quick installation and field service.
The 330101‑00‑16‑10‑11‑RU is a Bently Nevada 3300 XL 8 mm eddy‑current proximity probe, used for high‑precision, non‑contact measurement of rotor-to-probe distance, enabling real-time vibration and displacement monitoring.
What machinery can 330101‑00‑16‑10‑11‑RU be used on?
This probe is suitable for turbines, compressors, and pumps, providing real-time shaft position and vibration data for machine protection and monitoring systems.
How does 330101‑00‑16‑10‑11‑RU measure shaft displacement?
It uses eddy-current sensing: the output voltage is proportional to the distance between the probe tip and a conductive target, converting mechanical displacement into an electrical signal for system monitoring.
What frequency response does 330101‑00‑16‑10‑11‑RU support?
The frequency response spans 0 Hz to ~10 kHz, supporting both static and dynamic vibration measurement, suitable for high-speed rotating machinery.
What equipment must 330101‑00‑16‑10‑11‑RU be used with?
It must be used with a 3300 XL Proximitor Sensor and optionally extension cables; the probe alone cannot directly interface with a monitoring host.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
