-
Match the complete marking
Include 100630-00-79-05-01 and any revision or assembly number visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label and connection photos. Have your maintenance team compare the offered 100630-00-79-05-01 with the installed equipment and applicable Bently Nevada documentation.
Technical specifications for 100630-00-79-05-01
-
Manufacturer:Bently Nevada
-
Product Category:Machinery Monitoring Systems
-
Spare Part Number:100630-00-79-05-01
-
Weight:0.25 kg
-
Tariff Code:8537101190
-
Probe family:3300 XL 8 mm underwater
-
Mounting thread:3/8-24 UNF
-
Unthreaded length:0.0 in (00 option)
-
Overall case length:7.9 in
-
Total probe length:0.5 m
-
Connector option:Miniature coaxial ClickLoc with protector (01)
-
Cable type:Standard cable inside Tefzel tubing
-
Probe-case material:AISI 304 stainless steel
-
Tip-to-case seal rating:34 bar (500 psi), nitrogen
-
Probe operating range:-51 to +177 deg C
-
Connector sealing:Connector end is not submersible
Information
- Bently Nevada 100630-00-79-05-01 is a 3/8-24 UNF 3300 XL 8 mm underwater proximity probe with a sealed case, Tefzel tubing, 7.9 in overall case and 0.5 m lead.
Pressure barrier: Validate the machine seal separately from the transducer rating.
Release check: Confirm electrical-chain length and stable gap response before service.
The 100630 belongs to the 3300 XL 8 mm transducer family. Pair it only with the corresponding 8 mm extension cable and Proximitor, keeping the complete electrical length and target calibration together; the 11 mm and 25 mm underwater families use different sensors.
The manufacturer rates the probe tip-to-case seal to 34 bar nitrogen and specifies an AISI 304 case. Validate the process fluid, mounting seal, pressure boundary and connector location for the actual machine.
-
Bently Nevada 100630-00-79-05-01 technical reference
Original manufacturer Bently Nevada 3300 XL Underwater Probes, 175852 Rev. G. Family specifications and ordering information. -
Bently Nevada 100630-00-79-05-01 engineering guide
Apter Power installation, interface and fault-isolation guide for the offered complete model.
Platform applications: The applications below describe the complete measuring-channel functions. Verify the target, mounting position and approved channel design before selecting a replacement.
-
Hydroelectric machinery
Position the probe in an approved immersed sensing location while routing its connection above the liquid boundary. -
Wastewater equipment
Use the sealed case where the machine design exposes the probe to liquids; confirm process compatibility. -
Radial vibration channel
Set an 8 mm matched chain at the approved bearing target and check the gap under operating conditions. -
Axial position channel
Use a conductive target with adequate travel and keep the connector junction in a protected dry location.
The probe body may be immersed; the ClickLoc connector end must not be submerged.
AISI 304 is not suitable for salt water; evaluate the actual liquid before installation.
Treat the 34 bar nitrogen tip-to-case rating as a seal limit, not a vessel rating.
Do not loosen the factory tubing fitting on the sealed probe case.
Use the 3300 XL 8 mm extension and Proximitor for the selected total length.
Record connector position, seal inspection, static gap and channel trend.
Alternative Names
Technical notes
Installation relationship: The probe body may be immersed; the ClickLoc connector end must not be submerged.
Measurement boundary: Do not loosen the factory tubing fitting on the sealed probe case.
Technical reference: Bently Nevada 3300 XL Underwater Probes, 175852 Rev. G.
FAQ View All FAQ
-
Can the connector end of 100630-00-79-05-01 be immersed with the probe case?No. The body and protected cable route are designed for fluid exposure, but the connector end is not liquid-sealed and must remain dry.
-
What pressure boundary must be checked for 100630-00-79-05-01 before installation?The tip-to-case interface is rated to seal 34 bar nitrogen. Confirm actual process pressure, fluid compatibility and the machine mounting seal separately.
-
Why is salt-water exposure a problem for 100630-00-79-05-01?The standard case is AISI 304 stainless steel, which the manufacturer excludes for salt-water duty. Obtain an approved alternative configuration for that environment.
-
What happens if 100630-00-79-05-01 is paired with an 11 mm underwater Proximitor?The underwater probe families use different calibrated sensor chains. Match the 100630 8 mm probe with its 8 mm extension and Proximitor instead.
-
How should the tubing connection on 100630-00-79-05-01 be handled during service?Keep the factory tubing fitting intact; loosening it can compromise the protected route. Inspect the external seal and tubing condition without disturbing the factory joint.
-
What could cause a shifted reading from 100630-00-79-05-01 without a probe fault?Target alloy, adjacent metal, gap, fluid-related connector contamination and a mismatched extension can each change the system response. Isolate these causes before condemning the probe.
-
Where should the connector protector of 100630-00-79-05-01 be located?Place the protected ClickLoc joint outside the submerged zone in a maintainable location, and check that liquid cannot migrate into the mating surfaces.
-
Which measurements should be recorded after commissioning 100630-00-79-05-01?Record the complete order code, extension and Proximitor markings, observed gap voltage, process medium, connector location and operating signal baseline.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.







