With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
Enhanced coupling nut. This option provides a better grip for tightening the cable to the accelerometer and is provided on both ends of the cable (see Figure 11).
The 200151-60-03-10 is a general-purpose, wide-frequency, case-mounted seismic transducer utilizing a piezoelectric sensing element. It generates a differential voltage signal proportional to the acceleration parallel to the sensitive axis of the transducer. This accelerometer integrates with Trendmaster ProTIMs and is fully compatible with the 200100 Dual Acceleration to Velocity flexiTIM Module, the 89130-01 Acceleration-to-Velocity Transducer Interface Module (TIM), as well as 1900/25 and 1900/27 monitors.
Hermetically sealed stainless steel case providing exceptional ruggedness in harsh industrial environments
Top-mounted, 5-pin connector facilitating robust attachment and removal of the interconnecting signal cable
Threaded base accommodating multiple mounting stud configurations for rigid machine casing attachment
The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs. The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors.
The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer’s top-mounted, 5-pin connector allows you to easily install and remove the interconnecting signal cable. A 3/8-24 threaded hole on the bottom of the sensor’s casing accommodates several mounting options.
The 20015x Accelerometers contain a piezoelectric sensing device that generates a charge when it is subjected to vibration. The accelerometers electronically convert this charge to a differential voltage signal that is proportional to the acceleration that is parallel to the sensitive axis of the transducer.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Petroleum Refining & Petrochemicals
Transmits high-frequency casing vibration signals from crude oil pumps and hydrocracking compressors to flexiTIM modules for rotor dynamic balance and early rolling element bearing failure monitoring.
Thermal Power Generation
Connects boiler feed pumps and induced draft fan bearing housings in high-temperature, high-vibration environments to transmit differential voltage signals, preventing catastrophic shaft coupling failures.
Hydropower Generation
Connects upper guide, lower guide, and thrust bearing housings of hydro-generator units to provide stable electrical routing of mechanical vibration signals in humid and oil-mist environments.
Iron, Steel & Black Metallurgy
Transmits severity signals from motors and gearbox bearings within high-temperature and high-electromagnetic interference zones of blast furnace air supply systems and hot rolling mills.
Modern Pulp & Paper Production
Connects densely packed bearing housings in the dryer and press sections of paper machines, resisting high-temperature steam and chemical washdown splashes while backhauling bearing status.
Torque coupling nuts to specification for locking and grounding; maintain minimum bend radius and isolate from high-voltage lines to prevent EMI. Keep 5-pin connectors clean and dry, and run Trendmaster loop check post-replacement to verify bias voltage.
The cable is configured with stainless steel armor casing, delivering an IP67 environmental sealing rating. It is rated for operation across a temperature range of -55 °C to +121 °C, aligning with the requirements of harsh industrial processing environments. The connector end incorporates an enhanced grip coupling nut to ensure a secure, vibration-resistant mechanical lock when coupled to the transducer casing.
Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
How many parts do you have in stock?
We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies.
What is the Bently Nevada 200151-60-03-10?
It is a 6.0-meter stainless steel armored standard interface cable equipped with an enhanced coupling nut and multi-agency approvals, used for signal interconnection between 20015x series accelerometers and Trendmaster monitoring hardware.
What type of signal does the 200151-60-03-10 cable transmit?
It transmits raw differential voltage signals converted from internal piezoelectric sensor charges, which are proportional to the machine vibration parallel to the sensor's sensitive axis.
Is the 200151-60-03-10 cable interchangeable with standard 8mm proximity probe cables?
No. This is a 5-pin seismic transducer signal cable and is entirely incompatible with the coaxial configurations used in proximity probe systems.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
