With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
200155-18-CN Low Frequency Trendmaster
Pro Accelerometer for Machinery
Condition Monitoring, with M8x1 Thread
and China-Specific Explosion-Proof Compliance
The 200155-18-CN is a Trendmaster Pro series case-mounted low-frequency accelerometer. The assembly contains a welded 316L stainless steel housing, a piezoelectric element, amplification circuitry, and a 5-pin connector. Within this part number, 200155 denotes the 1.5 Hz low-frequency model, -18 specifies the M8x1 metric mounting stud, and -CN represents China-specific explosion-proof compliance.
1.5 Hz Low-Frequency Response
M8x1 Metric Stud Interface
China-Specific Explosion-Proof Compliance
The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs. The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors.
The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer’s top-mounted, 5-pin connector allows you to easily install and remove the interconnecting signal cable. A 3/8-24 threaded hole on the bottom of the sensor’s casing accommodates several mounting options.
The 20015x Accelerometers contain a piezoelectric sensing device that generates a charge when it is subjected to vibration. The accelerometers electronically convert this charge to a differential voltage signal that is proportional to the acceleration that is parallel to the sensitive axis of the transducer.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 200155-18-CN Low Frequency Trendmaster Pro Accelerometer Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Cooling Tower Machinery
Monitors low-frequency radial vibration on slow-speed condensing fans and large reducer bearings to prevent unbalance damage.
Hydroelectric Power Generation
Measures low-frequency runout and shaft wobble on small-to-medium vertical or horizontal hydro-generator shafts within confined pits.
Water & Wastewater Treatment
Continuously tracks rotor health for large slow-speed drainage pumps, vertical axial flow pumps, and slow mechanical mixers.
Petrochemical & Refining
Leverages its China-specific certification for safe online monitoring of slow-speed process pumps and reciprocating hardware bearings in explosive zones.
Wind Power Generation
Installed on the multi-megawatt low-speed side to capture wide-amplitude, low-frequency vibrations of the main shaft and input shaft bearings.
Steel & Metallurgy
Tracks mechanical wear of large slow-speed converter drive systems and rolling mill cooling bed drivetrains in high-temperature environments.
During the use of 200155-18-CN, tighten the M8x1 stud to 4.5 N·m to prevent 1.5 Hz low-frequency signal distortion from looseness. Secure the top 5-pin interface with a 200151 cable for an IP67 seal against moisture. Wire via an upstream barrier in hazardous zones and clean case dust regularly.
The 200155-18-CN integrates a top-mounted, hermetically sealed 5-pin connector for secure mating with a 200151 shielded cable assembly, such as the 200151-20-03-00 armored cable, and supports continuous long-term operation within a temperature range of -20°C to +100°C.
It is a low-frequency seismic accelerometer dedicated to the Bently Nevada Trendmaster Pro system with China-specific explosion-proof certification.
What does the -18 option mean for 200155-18-CN?
It designates the mounting stud thread specification, which is an M8 x 1 to M8 x 1 metric arrangement.
What are the primary application scenarios for 200155-18-CN?
Continuous low-frequency vibration monitoring of slow-speed bearings, cooling tower fans, slow agitators, and water pumps.
What is the fundamental working principle of 200155-18-CN?
The internal piezoelectric element generates a charge under vibration, which internal circuits convert to a differential analog voltage proportional to acceleration.
Do you offer global delivery services?
Yes. We ship globally, and we are able to quickly deliver parts globally to any corner of the world. Unless otherwise specified, we will ship your order via (DHL). We can also ship through FedEx, UPS, and TNT. We can also use your account.
How many parts do you have in stock?
We have an extensive stock base consisting of ten thousands of new and discontinued automation parts including those from leading manufacturers such as:Control Systems (DCS, PLC, CNC) ,Panel Controllers,HMI and Display Panels,Drives,Encoders and Resolvers,Power Supplies. If you are unable to find what you are looking for then don’t panic.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
