With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The 200152-15-00 is an industrial accelerometer cable manufactured by Bentley, primarily used for vibration monitoring of industrial equipment (such as rotating machinery), and capable of accurately transmitting electrical signals generated by sensors.
Superior Environmental Protection
Industrial Durability & Flexibility
Broad System Compatibility
The 20015x Accelerometers are general purpose, wide frequency, case-mounted seismic transducers designed for use with Trendmaster ProTIMs. The 200150 Accelerometer also operates with the Trendmaster 2000 system. The accelerometer interfaces with the 200100 Dual Acceleration to Velocity flexiTIM Module and the 89130-01 Acceleration-to-Velocity TIM (Transducer Interface Module), as well as the 1900/25 and 1900/27 monitors. The 20015x Accelerometers feature a hermetically sealed, stainless steel case. This design provides an extremely rugged transducer that is well suited for harsh industrial environments. The transducer’s top-mounted, 5-pin connector allows you to easily install and remove the interconnecting signal cable. A 3/8-24 threaded hole on the bottom of the sensor’s casing accommodates several mounting options.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Bently Nevada 200152-15-00 Accelerometer Interface Standard Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Petroleum Refining
Monitoring high-frequency vibration on crude oil pumps to identify early bearing wear.
Petrochemical Industry
Monitoring impact signals near the crankcase of reciprocating compressors.
Steel & Metallurgy
Monitoring gear tooth wear on hot rolling mill gearboxes.
Fertilizer Production
Installing on carbamate pump bearings, utilizing its PVC jacket to resist environmental corrosion.
Pulp & Paper
Installing on dryer section bearings, leveraging its temperature resistance.
Marine Engineering
Performing dynamic monitoring on the shafting bearings of marine main engines.
When using the 200152-15-00 cable, strictly adhere to its minimum bend radius of 73.7 mm; avoid over-bending to prevent damage to the internal shielding and signal wires. During connector installation, ensure the O-ring is intact and apply an appropriate amount of DC4 silicone grease to maintain its IP67 rating and prevent moisture ingress, which can cause signal drift. Additionally, avoid routing the cable parallel to high-power lines to minimize electromagnetic interference, and ensure the shield drain wire is properly grounded at the monitor end to guarantee the accuracy of high-frequency vibration data transmission.
It is a 15-meter accelerometer interface standard cable manufactured by Bently Nevada, specifically designed to connect accelerometer sensors to monitoring systems.
What is the primary function of 200152-15-00?
Its function is to transmit high-frequency vibration signals from the accelerometer to a Proximitor or Trendmaster ProTIM module while providing electromagnetic shielding.
Which sensors are compatible with 200152-15-00?
It is primarily compatible with Bently Nevada 200150, 200155, and 200157 accelerometers.
What is the IP rating of 200152-15-00?
When properly connected, the connector achieves an IP67 rating, providing excellent protection against water and dust.
What is the operating temperature range for 200152-15-00?
It is designed to operate within a temperature range of -20°C to +100°C.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
