ABB XV C772 A102, product ID 3BHE032285R0102, is a varnished High Voltage Divider board listed by ABB for ACS2000 medium-voltage drives.
- ABB Product ID: 3BHE032285R0102
- ABB Type Designation: XV C772 A102
- Catalog Description: XV C772 A102; HVD- BOARD VARNISHED
- Board function: High Voltage Divider
Within the ACS2000 input filtering unit section, its verified system function is the high-voltage-divider function. ABB identifies the board in the IFU assembly and in configuration-specific resistor-box or filter-assembly parts layouts. The official designation establishes a voltage-divider signal path, but ABB's public records reviewed here do not publish the board input range, division ratio, output level, accuracy, connector pinout, or the receiving measurement channel. It must not be described as a digital I/O, communication, current-measurement, or general PLC controller board. The verified equipment context is the ABB ACS2000 air-cooled medium-voltage drive used to control standard induction motors. Installation requires the exact ACS2000 configuration, the current IFU parts drawing, and confirmation of the surrounding relay, synchronization, IGBT-supply, and optical-interface components.
Important Notice: Verify both 3BHE032285R0102 and XV C772 A102 on the ABB record or physical board label.
Apter Power XVC772A102 3BHE032285R0102 Manuals and Guides
Important Notice: The first link is the product-parameters PDF prepared only from the cited manufacturer information; the second link is the Apter Power product manual. Confirm the physical nameplate, current manufacturer documents, and host-system requirements before installation or replacement.
ACS2000 IFU voltage division
Performs the HVD-board role in an ACS2000 input filtering unit when the exact ABB configuration lists 3BHE032285R0102.
ACS2000 resistor-box assembly service
Used in the configuration-specific ACS2000 resistor-box section shown in ABB's spare-parts manual.
ACS2000 filter-assembly service
Used in the configuration-specific IFU filter assembly where ABB lists the exact product ID as the HVD board.
Medium-voltage induction-motor drive maintenance
Supports the documented HVD function in an ACS2000 drive controlling a standard induction motor, subject to exact drive and IFU verification.
Read and follow the current ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1
Verify 3BHE032285R0102 and XV C772 A102 on the board label and current ACS2000 parts list before work.
2
Treat the IFU as medium-voltage equipment and follow the exact ABB isolation, discharge, grounding, and lockout procedure before access.
3
Use ESD controls and protect the varnished board coating, connectors, and mounting points from contamination or mechanical damage.
4
Do not publish or configure a division ratio, voltage range, pinout, accuracy, or insulation value without an exact ABB drawing or manual.
5
Confirm every surrounding board, relay, connector, cable, and configuration position from the exact ACS2000 revision before energization.
Videos
News
Applications
