ABB P-HC-BRC-41000000 is the official order-style designation for the Ethernet-enabled BRC410 Harmony Rack bridge controller, also cataloged by ABB as SPBRC410. It is a process controller, not an Ethernet switch, standalone protocol converter, or I/O module.
- Processor: Freescale ColdFire MCF5407, 160 MHz, 32 bit
- Memory: 8 MB DRAM; 2 MB NVRAM
- Control capacity: Up to 30,000 function blocks
- Controller power: 2 A at 5 VDC; 10 W
The controller executes continuous, sequential, batch, advanced, user-defined, and C-based control strategies with capacity for up to 30,000 function blocks. It receives process and peer data, evaluates the configured control strategy, and issues commands to compatible ABB I/O architectures. ABB documents a 160 MHz 32-bit Freescale ColdFire MCF5407 processor, 8 MB DRAM, 2 MB NVRAM, two RS-232 ports or one RS-232 plus one RS-485, 10/100 Ethernet, mini-USB service, and licensed Modbus TCP server/client data exchange. It is used with Harmony Rack, SD Series, S800, PDP800, PBA800/HN800, INFI-Net or PN800, Composer, and project-specific redundancy hardware in power, pulp and paper, water, chemical, and other continuous-process systems. Exact firmware, license, topology, PBA, and failover design must be verified per project.
Important Notice: Update ApterPower product ID 855774 at /ABB/spbrc410; do not create a second P-HC-BRC-41000000 page.
Apter Power SPBRC410 / BRC410 / P-HC-BRC-41000000 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited ABB official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current ABB documents, and host-system requirements before installation or replacement.
Large process-unit controlExecutes high-capacity continuous, sequential, batch, and advanced strategies.
Modbus TCP integrationExchanges licensed controller data with configured Modbus TCP servers and clients.
Multi-family ABB I/O coordinationCoordinates Harmony Rack, SD Series, S800, and documented PDP800 paths.
HPG800 evolutionSupports engineered controller/gateway consolidation where ABB's project documents permit it.
Read and follow the exact ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Back up the complete controller database, firmware, tuning, UDF/C code, license record, and redundancy settings.
2Verify P-HC-BRC-41000000 on the physical nameplate and preserve the existing ApterPower ID and canonical.
3Confirm the installed PBA, rack slot, power, Ethernet topology, serial wiring, addressing, and licenses.
4Do not exceed ABB's documented Modbus TCP server, client, or licensed point limits.
5Use an approved outage, failover, download, rollback, and commissioning plan.
6Test I/O, peer data, Modbus data, alarms, time synchronization, diagnostics, and redundancy transfer before release.
7Do not publish origin, HS code, weight, dimensions, or a present lifecycle phase from reseller data.
Videos
News
Applications
