ABB NTMP01 is an evidence-bounded multifunction processor termination unit in the Bailey INFI 90 / Harmony Rack installed-base context. ABB identifies NTMP01 as the termination unit used with rack-mounted controllers and general-purpose communication interfaces.
- Product type: Multifunction processor termination unit
- RS-232-C: Two isolated ports
- RS-485: One non-isolated port
- Documented cable: NTKU01 in supported controller configurations
System role: It presents two isolated RS-232-C ports and one non-isolated RS-485 port for supported controller/interface configurations. The page publishes only functions and ratings stated by the cited ABB material; sibling and successor data are not transferred. Architecture boundary: ABB pairs NTMP01 with NTKU01 in controller applications; DTE/DCE and exact host/cable settings must be verified from the installed configuration. Exact cable, termination, firmware, revision and host dependencies must be checked against the physical assembly and approved project drawings. For maintenance, migration or replacement work, verify identity, companion hardware, wiring, addressing, power, network settings and commissioning tests before returning the loop or node to service. Current formal lifecycle phase, origin, HS code, dimensions and logistics weight remain HOLD without exact ABB evidence.
Important Notice: Verify the complete ABB NTMP01 nameplate, revision and installed-system documentation before use.
Apter Power NTMP01 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited ABB official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current ABB documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for ABB NTMP01.
System documentationProvides a source-traceable boundary for rack, network, I/O and termination records.
Commissioning reviewGuides pre-power checks, companion-module verification and controlled functional testing.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact ABB documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete ABB NTMP01 nameplate, revision and installed-system documentation before use.
2Do not treat NTMP01 as a generic serial breakout or transfer parameters from NIMP01, NTMF01 or other termination hardware.
3De-energize and follow the site's approved electrical and process-safety procedure before disturbing hardware or field wiring.
4Back up controller, network, I/O, addressing and configuration data before replacement or firmware work.
5Verify every companion module, termination unit, cable, connector and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented loop, network or functional test and confirm alarms and fail states after work.
8Current formal lifecycle phase, origin, HS code, dimensions and logistics weight remain HOLD without exact ABB evidence.
Videos
News
Applications
