Product image is representative; revision or series may vary. Contact us to request a specific version.
Product Describe:
WOODWARD 9905-463 is a ProAct Model II speed control used with the documented ProAct actuator arrangement. Woodward Application Note 51499 identifies 9907-1290 as its replacement speed control and Manual 04121 as the applicable manual family.
WOODWARD 9905-463 is a ProAct Model II speed control used with the documented ProAct actuator arrangement. Woodward Application Note 51499 identifies 9907-1290 as its replacement speed control and Manual 04121 as the applicable manual family.
Controls a documented ProAct Model II actuator application
Accepts the documented speed-bias interface
Uses Woodward Manual 04121 for setup and service
Has the official replacement reference 9907-1290
Apply WOODWARD 9905-463 only in the documented system position after checking its interfaces, companion hardware and configured values.
Important Notice: Confirm the full 9905-463 marking, installed revision, compatible hardware and approved commissioning record before release.
The first document presents model-specific technical and system data. The second provides a separate installation, connection, commissioning and acceptance workflow.
Prime-mover speed control
Regulates the documented ProAct actuator in engine or turbine speed service.
Generator control integration
Accepts a configured EGCP-2 speed-bias command in the documented arrangement.
Legacy control replacement
Replaces the identical 9905-463 after wiring and actuator checks.
Upgrade planning
Uses Woodward 9907-1290 as the documented replacement path.
Read the applicable WOODWARD instructions before work. Verify WOODWARD 9905-463 and the installed system configuration before commissioning.
1
Verify the complete 9905-463 marking and do not identify it as a 2301A load-sharing control.
2
Record actuator model, rotation and linkage before disconnection.
3
Follow Woodward Manual 04121 for the installed ProAct arrangement.
4
Label the speed-bias and actuator connections before removal.
5
Confirm the documented ±3 Vdc bias polarity where an EGCP-2 interface is used.
6
Do not substitute 9907-1290 without completing the Woodward replacement checks.
7
Prevent overspeed by starting with controlled speed and gain settings.
8
Verify stable speed response, actuator travel and shutdown action before release.
Technical notes
Use only the complete WOODWARD 9905-463 identity and the current manufacturer documentation. Verify the installed revision, companion hardware, wiring and saved configuration before replacement or release.