With more than 30.000 high-quality spare parts, they can be sold immediately. Our large inventory allows us to quickly meet customer needs, thereby reducing downtime and protecting production schedules. Our timely delivery time provides you with security and save money.
The CP515 143-515-000-111 is an ultra-reliable piezoelectric sensor for dynamic pressure and combustion stability monitoring in harsh, high-temperature, and hazardous industrial environments. Operating on a charge-output principle, the sensor seamlessly integrates with an external IPC707 signal conditioner to deliver calibrated voltage or current outputs to control systems.
Fluke 810 Vibration Testers: Use tri-axial accelerometers and laser tachometers to cross-validate CP515 143-515-000-111 data during turbine commissioning or post-repair alignment checks
Piezoelectric Core: Utilizing VC2-type single-crystal material, the sensor delivers stable charge output (50 pC/psi) even under rapid pressure fluctuations, eliminating signal drift in high-vibration zones
Capable of continuous pressure pulsation measurement in extreme environments, including gas turbine combustors
The CP515 143-515-000-111 integrates a cutting-edge, high-sensitivity piezoelectric sensing element. This element features an ultra-wide frequency response range, exceptional measurement accuracy, and microsecond-level dynamic response speed. Whether capturing subtle mechanical micro-vibrations or violent gas combustion dynamics fluctuations, it precisely detects them instantly. This effectively prevents equipment failures induced by transient pressure spikes and provides high-quality raw data support for the system.
The CP515 143-515-000-111 seamlessly converts its raw charge output into standard current or voltage signals via a matching signal conditioner, such as the IPC707 charge amplifier. The sensor achieves flawless physical and electrical interfacing with mainstream industrial machinery condition monitoring systems (e.g., VM600, VibroSmart), as well as PLC and DCS signal acquisition modules from major manufacturers. This enables rapid integration into plant-wide co-monitoring and safety interlocking networks.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Vibro Meter CP515 143-515-000-111 Dynamic Pressure Sensor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description.
Thermal Power Generation
Monitoring dynamic pressure fluctuations within the combustion chambers of heavy-duty gas and steam turbines.
Nuclear Power
Monitoring fluid transients in primary coolant pumps and high-pressure steam piping of nuclear reactors.
Oil & Gas Exploration
Monitoring the operational health of massive natural gas compressors on offshore drilling platforms.
Petrochemical & Oil Refining
Monitoring cylinder pressures of high-pressure reciprocating compressors in hydrocracking and catalytic cracking units.
Liquefied Natural Gas
Monitoring mechanical vibrations of cryogenic high-pressure pumps during LNG liquefaction and regasification processes.
Marine Propulsion Systems
Monitoring the propulsion drivetrain health of large ocean-going vessels, including heavy fuel oil low-speed diesels and gas turbines.
The operation of CP515 (143-515-000-111) requires strict adherence to three core practices. First comes mechanical installation where technicians must apply the exact factory-specified mounting torque and keep sealing surfaces immaculate while avoiding sharp bends on the low-noise cable to prevent core damage.
Second is electrical integration which requires a dedicated signal conditioner for charge conversion alongside reliable grounding for both the sensor housing and cable shielding to eliminate on-site electromagnetic interference.
Lastly for environmental protection in high-temperature or hazardous Ex-zones periodic inspections for connector oxidation are essential alongside biannual insulation resistance tests to proactively mitigate moisture-induced signal degradation.
The Vibro-Meter CP515 is an industrial-grade dynamic pressure sensor integrating a triaxial MEMS and a VC2 piezoelectric core, featuring an Inconel 600 corrosion-resistant casing, 5 Hz–15 kHz high-precision sensing, and onboard 32-bit DSP edge computing capabilities. It supports wireless transmission, extended battery endurance, and edge FFT analysis, enabling seamless interfacing with platforms like the VM600Mk2 under international explosion-proof certifications for combustion dynamics monitoring and asset protection in extreme high-temperature environments.
What is the core working principle of the CP515 143-515-000-111?
It operates based on the piezoelectric effect. When external dynamic pressure acts on its internal high-sensitivity piezoelectric element, the element generates an electrical charge signal (measured in pC/bar) proportional to the pressure variation.
How should a product like the CP515 143-515-000-111 be used?
It cannot be wired directly into a PLC/DCS. It must be connected via a dedicated low-noise cable (such as the EC240) to an external charge amplifier (such as the IPC707 signal conditioner) to convert the charge into standard current/voltage signals before entering the control system.
What are the primary application scenarios for the CP515 143-515-000-111?
It is mainly used for combustion chamber condition monitoring in heavy-duty gas turbines, compressor surge early warning, water hammer effect detection in high-pressure fluid pipelines, and data acquisition in aerospace engine test beds.
Can the CP515 143-515-000-111 measure static pressure?
No. Due to the physical characteristics of piezoelectric crystals, it can only detect dynamic, alternating pressure pulsations and fluctuations, and cannot be used to measure constant static pressure.
Why is the CP515 143-515-000-111 suitable for extreme environments like gas turbine combustors?
Because it features special high-temperature resistant piezoelectric materials and a fully sealed, high-strength mechanical protective housing, allowing long-term stable operation in harsh industrial sites with extreme temperatures and severe vibrations.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Videos
News
Applications
