-
Match the complete marking
Match the complete Siemens 6ES5734-1BD20 marking. Verify the complete converter-cable marking and both serial endpoints.
-
Check the offered item before ordering
Request available label and connector photos. Have the maintenance team compare the offered 6ES5734-1BD20 with the installed unit and applicable Siemens installation requirements.
Technical specifications for 6ES5734-1BD20
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:6ES5734-1BD20
-
Weight:0.16 kg
-
Tariff Code:8537101190
-
Converted interfaces:RS232 / TTY
-
TTY signalling:20 mA current loop
-
Cable assembly length:3.2 m
-
CPU-side connector:15-pin
-
PC-side connector:25-pin
-
Conversion architecture:Integrated RS232/TTY converter
Information
- Siemens 6ES5734-1BD20 bridges two different electrical serial interfaces in legacy programming and HMI service connections, where matching the protocol alone does not establish electrical compatibility.
Transfer roles: Programming and project transfer depend on the connected CPU or panel.
Workstation connection: Connector adapters change pin arrangements without replacing signal conversion.
The connection matrix identifies compatible legacy operator-panel arrangements and distinguishes programming, data communication and operating-system transfer roles. These roles depend on the actual panel and interface. A cable used successfully for one transfer purpose is not automatic evidence that a different panel or firmware-transfer operation is supported.
The service computer needs a suitable RS232 interface and an appropriate software environment. The S5 programming connection uses the CPU-side 15-pin and PC-side 25-pin arrangement; a 9-pin serial computer port requires the correct adapter. USB-to-serial conversion must be validated with the actual converter and software before relying on it for plant recovery.
6ES5734-1BD20 Official Technical Excerpt
SIMATIC HMI / PC-based Automation Catalog ST 80/ST PC, 2021. Selected original pages cover the applicable interfaces, operating limits and system context. PDF · 1 pages.6ES5734-1BD20 Installation & Verification Guide
Apter Power field workbook for identify the serial partners, inspect the conversion path, functional testing and handover. PDF · 5 pages.
Application scope: The following roles apply within the matched system. Pc serial adapter, engineering software and target hardware are separate items unless included in the quotation.
S5 programming access
Connect a suitable RS232 service computer to the supported S5 TTY programming interface.Legacy panel servicing
Use the connection matrix for the exact OP/TP variant and intended project-transfer role.Serial fault isolation
Separate workstation-port faults from converter, adapter and target-interface faults.Recovery workstation validation
Qualify a reproducible service connection before a scheduled plant outage.
Record the service-PC port and exact target CPU or panel variant. Check which programming or data-transfer function is required.
Keep the active RS232/TTY converter in the connection. Inspect connectors and any 25-to-9-pin adapter for damage or incorrect wiring.
Select the correct serial port, driver and supported engineering environment. Validate any USB serial adapter before relying on it for recovery.
Connect under the approved equipment-service procedure and read target identity and diagnostics before attempting a download.
Preserve the existing project, perform only the authorized transfer and confirm the resulting online state. Record the successful PC, adapter and software combination.
Retain the final tested settings, physical connections and accepted response for 6ES5734-1BD20.
Alternative Names
Technical notes
Electrical boundary: RS232-to-TTY conversion is required even when a passive adapter makes connectors fit.
Transfer-role boundary: Programming, data exchange and firmware transfer are separate compatibility checks for the actual target.
Recovery connection: Prove read-only online access before changing a program and retain a known-working workstation configuration.
FAQ View All FAQ
-
Can a passive adapter replace 6ES5734-1BD20 between an RS232 PC and TTY equipment?No. A passive adapter changes pin connections but not the electrical signal type. Keep the required RS232-to-TTY conversion in the path.
-
Does 6ES5734-1BD20 make an RS485 port compatible with a TTY interface?No. RS485 is a different electrical interface. Identify the actual port standard before connecting or selecting a converter.
-
Why can 6ES5734-1BD20 connect physically yet fail to transfer a panel project?Connector fit does not prove protocol, panel variant or transfer-mode compatibility. Check the partner-specific connection matrix and configured serial settings.
-
What must be verified when 6ES5734-1BD20 is used with a 9-pin PC serial port?Use the correct serial adapter between the 25-pin cable end and the PC port. Confirm the assigned serial port and the adapter wiring before troubleshooting the target.
-
Is a USB-to-serial adapter guaranteed to work with 6ES5734-1BD20?No. Validate the actual adapter, driver and software combination with the TTY converter before using it as the only recovery connection.
-
Can 6ES5734-1BD20 be treated as an Ethernet programming connection?No. It is a serial RS232/TTY conversion path. Select the serial interface in the engineering tool and use the intended target protocol.
-
Does successful data communication through 6ES5734-1BD20 prove firmware-transfer support?No. The permitted transfer roles depend on the operator panel and interface. Check the specific operating-system transfer requirement separately.
-
How should a restored service connection using 6ES5734-1BD20 be tested before downloading a program?First establish a read-only online connection and confirm target identity and readable diagnostics. Preserve the original application before any authorized write.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.



