Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6ES5312-3AB32
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6ES5312-3AB32
-
Manufacturer:Siemens
-
Product Category:PLC Systems
-
Spare Part Number:6ES5312-3AB32
-
Estimated shipping dimensions:3.3x22.6x24.3cm
-
Weight:0.74 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Product family:SIMATIC S5
-
Interface type:IM312-3
-
Configuration:Centralized
-
Installed side:Expansion unit
-
Expansion units:EU 183U / EU 185U with I/O modules
-
Controller-side interface:IM300-3 6ES5300-3AB11
-
Connecting cable:Permanently connected
-
Cable length:0.95 m for the 6ES5312-3AB3X execution
-
Maximum centralized path:2 m to the final expansion-unit interface
-
Expansion count:Up to four expansion units per IM300-3
-
Final-line termination:6ES5760-0AB11 on the last IM312-3
-
Indicators and controls:None on the IM312
Information
Overview
Manuals
Common Applications
Product Precautions
Siemens 6ES5312-3AB32 carries the centralized SIMATIC S5 bus into an EU 183U or EU 185U expansion unit while preserving the controller-side IM300-3 pairing.
- Provides the IM312-3 interface on the expansion-unit side.
- Uses a permanently connected 0.95 m cable on the AB3X execution.
- Serves centralized EU 183U or EU 185U I/O expansion.
- Pairs with the IM300-3 controller-side interface.
The documented centralized chain permits up to four expansion units on one IM300-3. The complete path to the last expansion-unit interface must remain within 2 m, and the final IM312-3 requires the specified terminator.
Important Notice: preserve the complete 6ES5312-3AB32 identity, expansion-unit position, fixed cable, IM300-3 pairing and final termination before replacement.
Siemens 6ES5312-3AB32 Manuals & Downloads
Siemens 6ES5312-3AB32 Official System Manual Excerpt (PDF)Siemens 6ES5312-3AB32 Installation & Commissioning Guide (PDF)
The documents separate exact product evidence from the field sequence for identity, isolation, installation, verification and controlled handover.
Centralized S5 expansion
Carries the controller interface into an EU 183U or EU 185U.
Fixed-cable replacement
Restores the exact 0.95 m AB3X cable execution.
Legacy rack maintenance
Preserves the IM300-3 and IM312-3 pairing and termination.
I/O path verification
Checks the interface chain and every affected expansion-unit signal.
Apply these checks to the exact Siemens 6ES5312-3AB32 position before isolation, replacement or release.
1
Confirm the complete Siemens 6ES5312-3AB32 marking before work.
2
Place the controller and every connected expansion circuit in the approved maintenance state.
3
Record the expansion-unit slot and paired IM300-3 position.
4
Protect the permanently connected 0.95 m cable from twisting, crushing or extension.
5
Confirm the receiving unit is the documented EU 183U or EU 185U I/O arrangement.
6
Keep the complete centralized path to the final expansion interface within 2 m.
7
Retain the specified terminator on the final IM312-3 position.
8
Functionally verify every affected I/O point before service release.
Technical notes
Record the expansion-unit slot, paired IM300-3 position, fixed 0.95 m cable route and final terminator before removal. After controlled energization, review the interface path and functionally verify every affected I/O point.
FAQ View All FAQ
-
Which system role does Siemens 6ES5312-3AB32 perform?Siemens 6ES5312-3AB32 provides the IM312-3 interface on the expansion-unit side of a centralized SIMATIC S5 connection.
-
Where is Siemens 6ES5312-3AB32 installed in the centralized chain?The module is installed in the EU 183U or EU 185U expansion unit.
-
Which controller-side interface pairs with Siemens 6ES5312-3AB32?The documented controller-side counterpart is IM300-3 6ES5300-3AB11.
-
What fixed cable length belongs to Siemens 6ES5312-3AB32?The AB3X execution has a permanently connected 0.95 m cable.
-
How many expansion units can one IM300-3 serve with Siemens 6ES5312-3AB32?The centralized arrangement permits up to four expansion units on one IM300-3 interface.
-
What path-length limit applies when Siemens 6ES5312-3AB32 is used?The interface path from the controller-side module to the final expansion-unit interface must not exceed 2 m.
-
How must the final Siemens 6ES5312-3AB32 position be terminated?The last IM312-3 position requires the documented 6ES5760-0AB11 terminator.
-
How should Siemens 6ES5312-3AB32 be checked after replacement?Confirm the exact article, fixed-cable route, termination, interface diagnostics and every affected I/O point before service release.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.