Get Parts Quote
Name
Company *
Phone *
Email *
Address
City
State / Province / Region
Zipcode
Country
Quantity *
Part Number *
Manufacturer
Preferred Condition
Additional Information
Cancel

6SL3130-6TE21-6AA4

Smart Line Module
In Stock
Ships by Monday, October 26
Fast Shipping Available

Product Describe:

Siemens 6SL3130-6TE21-6AA4 is a SINAMICS S120 Smart Line Module in booksize construction with internal air cooling. The module provides DC-link infeed and regenerative feedback for a matched drive system, with a 16 kW rated power level.

Ask our team:

Get a quick price for: 6SL3130-6TE21-6AA4
Quantity*
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Apterpower please read our privacy policy.

Technical specifications for 6SL3130-6TE21-6AA4

Technical specifications for 6SL3130-6TE21-6AA4

  • Manufacturer:
    Siemens
  • Product Category:
    Server Driver
  • Spare Part Number:
    6SL3130-6TE21-6AA4
  • Estimated shipping dimensions:
    10x27x41cm
  • Weight:
    7.15 kg
  • Tariff Code:
    8537101190
  • Counliy of origin:
    Germany
  • Drive system:
    SINAMICS S120
  • Module type:
    Smart Line Module
  • Construction:
    Booksize
  • Cooling method:
    Internal air cooling
  • Input phases:
    3 AC
  • Nominal input:
    380-480 V AC, 50/60 Hz
  • Input operating voltage:
    342-528 V AC
  • Input operating frequency:
    47-63 Hz
  • Conditional short-circuit strength:
    65 kA with specified Class J fuse or UL489 / CSA 22.2 No. 5-02 circuit breaker
  • Minimum fundamental power factor:
    0.96
  • Total power factor:
    0.65-0.90
  • Overvoltage category:
    Class III
  • DC-link voltage relationship:
    1.35 x line voltage
  • Electronics supply:
    24 V DC, -15% / +20%
  • Maximum electronics current:
    0.95 A at 24 V DC
  • Rated infeed power:
    16 kW
  • S6-duty infeed power:
    21 kW
  • Maximum infeed power:
    35 kW
  • Rated regenerative power:
    16 kW
  • S6-duty regenerative power:
    21 kW
  • Maximum regenerative power:
    35 kW
  • DC-link current at 540 V:
    30 A
  • DC-link current at 600 V:
    27 A
  • S6-duty DC-link current:
    35 A
  • Maximum DC-link current:
    59 A
  • Input current at 380 V:
    29 A, 3 AC
  • Input current at 400 V:
    27.5 A, 3 AC
  • Input current at 480 V:
    24.5 A, 3 AC
  • S6-duty input current at 400 V:
    35 A
  • Maximum input current at 400 V:
    57.5 A
  • Electronics-busbar ampacity:
    20 A at 24 V DC
  • DC-link busbar ampacity:
    100 A
  • Module DC-link capacitance:
    710 microfarads
  • Maximum drive-system DC-link capacitance:
    20000 microfarads
  • Line-side connection:
    Screw-type terminal X1
  • Line conductor cross-section:
    2.5-10 mm2, AWG 14-8
  • Protective-earth connection:
    M5 screw
  • Shield interface:
    Shield connection plate integrated into connector
  • Maximum shielded line length:
    630 m
  • Maximum unshielded line length:
    850 m
  • Enclosure protection:
    IP20 / UL open type
  • Operating ambient temperature:
    0-40 C
  • Cooling-air flow:
    0.016 m3/s
  • Installation altitude:
    1000 m
  • Power loss at rated power:
    0.190 kW including electronics-supply losses
  • Sound pressure level:
    60 dB
  • EMC with line filter:
    Category C2, EN 61800-3, shielded total cable length <=350 m
  • Standard radio-interference suppression:
    None
  • Standards conformity:
    CE, cULus

Information

Information

Overview Manuals Common Applications Product Precautions
Siemens 6SL3130-6TE21-6AA4 is a SINAMICS S120 Smart Line Module in booksize construction with internal air cooling. The module provides DC-link infeed and regenerative feedback for a matched drive system, with a 16 kW rated power level.
  • Supplies the common drive DC link
  • Returns regenerative energy through the line interface
  • Separates continuous, S6-duty and maximum load levels
  • Supports a filtered installation when EMC conditions require it

Use the module within the matched SINAMICS S120 drive assembly. Coordinate its line-side protection, electronic supply, shared DC link and cooling path; the busbar through-current ratings do not increase the module's own output capability.

Important Notice: Do not describe this Smart Line Module as an Active Line Module. Check the installed line voltage, duty cycle, total DC-link capacitance and line-filter arrangement before replacement.

Siemens 6SL3130-6TE21-6AA4 Manuals & Downloads
Siemens 6SL3130-6TE21-6AA4 Technical Reference (PDF)Siemens 6SL3130-6TE21-6AA4 Manufacturer Data Sheet (PDF)

The first document organizes model-specific engineering data and installation decisions. The second is the unchanged Siemens data sheet for this exact Smart Line Module.

Common DC-link infeed
Provides the power interface between a three-phase line and the matched SINAMICS S120 drive DC link.
Regenerative drive operation
Returns energy through the line interface while retaining the separate rated, S6-duty and maximum regenerative limits.
S6-duty drive cycles
Supports an engineered cyclic load profile without treating the S6 or maximum power level as a continuous rating.
Filtered EMC installation
Uses a line-filter arrangement for Category C2 operation within the stated shielded total cable-length condition.
Read the applicable SINAMICS S120 instructions before work. Verify Siemens 6SL3130-6TE21-6AA4, the infeed assembly, DC-link arrangement, protective devices and cooling requirements.
1
Match the three-phase line to the voltage and frequency operating ranges.
2
Verify the 24 V electronics supply separately from the high-power DC link.
3
Retain the specified protective device for the conditional short-circuit rating.
4
Connect protective earth through the specified M5 connection.
5
Use the X1 screw terminal with the stated conductor cross-section.
6
Keep total drive-system DC-link capacitance within its stated maximum.
7
Maintain the internal-air-cooling path and the specified ambient conditions.
8
Apply the line filter and shielded-cable limit when Category C2 is required.

Technical notes

Technical notes

Keep rated, S6-duty and maximum power levels separate; the DC-link voltage follows the mean rectified line voltage. Category C2 operation requires the specified line-filter arrangement and its shorter shielded-cable limit, not merely the module's general cable-length capability.

FAQS

  • Does this Smart Line Module hold a regulated, fixed DC-link voltage?
    Its DC-link voltage follows the mean rectified supply voltage, specified as 1.35 times line voltage. A fixed-voltage Active Line Module description is not appropriate for this build.
  • Can the 35 kW maximum be used as the continuous infeed rating?
    No. Rated infeed is 16 kW, S6-duty infeed is 21 kW and maximum infeed is 35 kW. The same three levels are listed separately for regenerative feedback.
  • Why are both 30 A and 27 A listed for the DC link?
    They refer to different DC-link voltages: 30 A at 540 V DC and 27 A at 600 V DC. They must not be confused with the separate three-phase input-current values.
  • Does the 100 A DC-link busbar rating make this a 100 A infeed?
    No. That value is busbar ampacity. The module's own rated DC-link current is 27 A at 600 V, with separate S6-duty and maximum current limits.
  • Is a 630 m shielded installation automatically Category C2?
    No. The general shielded line-length maximum and the EMC condition are different. Category C2 requires a line filter and a shielded total cable length no greater than 350 m.
  • What condition is attached to the 65 kA short-circuit figure?
    It applies with the recommended Class J fuse or a circuit breaker conforming to UL489 / CSA 22.2 No. 5-02. It is not an unconditional short-circuit claim for an arbitrary protective device.
  • How should the electronics supply be sized independently of the power circuit?
    The electronics require 24 V DC with -15% / +20% tolerance and up to 0.95 A. The 20 A electronics-busbar ampacity describes the through-current path, not this module's own consumption.
  • What cooling values should be retained when replacing the module?
    The build uses internal air cooling, with 0.016 m3/s cooling-air flow and a 0-40 C operating ambient range. Rated-power losses are 0.190 kW including the electronics-supply contribution.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, modules and cards, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer`s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

We’re Here When You Need Us

From product insights to customer service needs, our experienced service team will focus on getting you what you need quickly

Enquire

Complete our online form.

Call Us

Speak to one of our team.

Live Chat

Send us a message.