Which system uses 6SE7036-1EE85-1HA0?

Use 6SE7036-1EE85-1HA0 only in the documented SIMOVERT MASTERDRIVES rectifier/regenerating unit arrangement and the installed hardware configuration.

What should be checked before installing 6SE7036-1EE85-1HA0?

Confirm the complete marking, assigned position, companion hardware and approved configuration before field work.

How should wiring be handled when replacing 6SE7036-1EE85-1HA0?

Record every connector and conductor before removal, preserve polarity and shielding, and follow the applicable manufacturer connection instructions.

How is 6SE7036-1EE85-1HA0 configured after replacement?

Restore only the approved project or device settings, then verify status and diagnostics before automatic operation.

How should 6SE7036-1EE85-1HA0 be commissioned?

Energize under controlled conditions, exercise the intended system function and record the final diagnostic state.

What maintenance record is needed for 6SE7036-1EE85-1HA0?

Retain the as-found connection record, installed position, configuration revision and functional-test result.

Can 6SE7036-1EE85-1HA0 be substituted directly?

A substitution requires complete catalog-number, hardware-revision, interface and system-compatibility checks against the controlling documentation.

Siemens 6SE7036-1EE85-1HA0 SIMOVERT MASTERDRIVES PER2 control module

Name: 6SE7036-1EE85-1HA0
Brand: Siemens
SKU: 6SE7036-1EE85-1HA0

6SE7036-1EE85-1HA0

SIMOVERT MASTERDRIVES PER2 control module

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for 6SE7036-1EE85-1HA0

Manufacturer:

Siemens

Product Category:

General Automation

Spare Part Number:

6SE7036-1EE85-1HA0

Estimated shipping dimensions:

31.7x22x3.5cm

Weight:

0.56 kg

Tariff Code:

8537101190

Counliy of origin:

Germany

Module designation:

PER2

Supply system:

3 AC

Rated line-voltage range:

380 to 480 V AC

Rated frequency:

50/60 Hz

Construction:

Design E

Information

Overview Manuals Common Applications Product Precautions

Siemens 6SE7036-1EE85-1HA0 is simovert masterdrives per2 control module. It is the PER2 control module used by the documented SIMOVERT MASTERDRIVES infeed and regenerative-feedback equipment.

Coordinates infeed and regenerative operating states
Processes the assigned power-section feedback
Supports 50/60 Hz rectifier/regenerative operation
Fits the documented design-E equipment arrangement

6SE7036-1EE85-1HA0 is installed with SIMOVERT rectifier/regenerating power section, Drive control electronics, Line-side protection and precharge hardware, Approved 6SE70 parameter record.

Engineered applications include Regenerative conveyor drives, Common DC-link systems, Test-stand energy recovery, MASTERDRIVES cabinet restoration.

Important Notice: Confirm the full order number and design-E host, isolate the mains and DC link, preserve ribbon-cable and connector positions, and verify infeed and regeneration under controlled conditions.

Apter Power 6SE7036-1EE85-1HA0 Manuals and Guides

Apter Power 6SE7036-1EE85-1HA0 Product Technical Reference PDF 6SE7036-1EE85-1HA0 Engineering Installation and Verification Workbook

The first document presents model-specific technical identity and engineering data. The second provides a separate installation, connection and commissioning workflow.

Regenerative conveyor drives

6SE7036-1EE85-1HA0 supports this documented SIMOVERT MASTERDRIVES rectifier/regenerating unit engineering task.

Common DC-link systems

6SE7036-1EE85-1HA0 supports this documented SIMOVERT MASTERDRIVES rectifier/regenerating unit engineering task.

Test-stand energy recovery

6SE7036-1EE85-1HA0 supports this documented SIMOVERT MASTERDRIVES rectifier/regenerating unit engineering task.

MASTERDRIVES cabinet restoration

6SE7036-1EE85-1HA0 supports this documented SIMOVERT MASTERDRIVES rectifier/regenerating unit engineering task.

Read the applicable Siemens instructions before work. Verify 6SE7036-1EE85-1HA0 and the installed-system configuration.

Verify the complete 6SE7036-1EE85-1HA0 marking and the assigned SIMOVERT MASTERDRIVES rectifier/regenerating unit position before work.

Place the connected machine or process in the approved maintenance state before disturbing 6SE7036-1EE85-1HA0.

Isolate the applicable power and field energy, then confirm a safe state before disconnecting 6SE7036-1EE85-1HA0.

Record connector, conductor, slot and configuration identities before removal of 6SE7036-1EE85-1HA0.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies during handling.

Confirm that the installed companion hardware and approved project match the 6SE7036-1EE85-1HA0 arrangement.

Restore power in a controlled sequence and review device, rack and host diagnostics.

Prove the intended function and retain the final test result before returning 6SE7036-1EE85-1HA0 to service.

FAQS

What is 6SE7036-1EE85-1HA0?

Siemens 6SE7036-1EE85-1HA0 is simovert masterdrives per2 control module. It is the PER2 control module used by the documented SIMOVERT MASTERDRIVES infeed and regenerative-feedback equipment.
Which system uses 6SE7036-1EE85-1HA0?

Use 6SE7036-1EE85-1HA0 only in the documented SIMOVERT MASTERDRIVES rectifier/regenerating unit arrangement and the installed hardware configuration.
What should be checked before installing 6SE7036-1EE85-1HA0?

Confirm the complete marking, assigned position, companion hardware and approved configuration before field work.
How should wiring be handled when replacing 6SE7036-1EE85-1HA0?

Record every connector and conductor before removal, preserve polarity and shielding, and follow the applicable manufacturer connection instructions.
How is 6SE7036-1EE85-1HA0 configured after replacement?

Restore only the approved project or device settings, then verify status and diagnostics before automatic operation.
How should 6SE7036-1EE85-1HA0 be commissioned?

Energize under controlled conditions, exercise the intended system function and record the final diagnostic state.
What maintenance record is needed for 6SE7036-1EE85-1HA0?

Retain the as-found connection record, installed position, configuration revision and functional-test result.
Can 6SE7036-1EE85-1HA0 be substituted directly?

A substitution requires complete catalog-number, hardware-revision, interface and system-compatibility checks against the controlling documentation.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

6SE7036-1EE85-1HA0

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for 6SE7036-1EE85-1HA0

Technical specifications for 6SE7036-1EE85-1HA0

Information

Information