Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6SL3300-1AH32-5BA0
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6SL3300-1AH32-5BA0
-
Manufacturer:Siemens
-
Product Category:General Automation
-
Spare Part Number:6SL3300-1AH32-5BA0
-
Estimated shipping dimensions:37.4x27x9.5cm
-
Weight:3.1 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Product designation:Braking Module
-
Rated braking power:50.00 kW
-
Maximum braking power:250.00 kW
-
DC-link voltage:890 to 1035 V DC
-
Digital inputs:1
-
Digital-input voltage:24 V DC
-
Input low level:-3 to 5 V
-
Input high level:15 to 30 V
-
Typical 24 V input current:10 mA
-
Digital outputs:1
-
Digital-output voltage:24 V DC
-
Maximum digital-output load:500 mA
-
Control conductor cross-section:1.5 mm2 maximum
-
PE connection:M8
-
Brake-resistor conductor cross-section:50.0 mm2 maximum
Information
Overview
Manuals
Common Applications
Product Precautions
Siemens 6SL3300-1AH32-5BA0 is sinamics braking module. It switches a connected braking resistor to dissipate regenerative DC-link energy in a compatible SINAMICS drive system.
- Provides 50 kW rated braking duty
- Handles short-term braking demand up to 250 kW
- Monitors the high-voltage DC-link range
- Exchanges 24 V digital enable and status signals
6SL3300-1AH32-5BA0 is installed with Compatible SINAMICS power unit, Approved braking resistor, DC-link and PE connections, 24 V control wiring.
Engineered applications include Rapid deceleration of high-inertia loads, Hoist and crane braking, Test-stand energy dissipation, Drive-system retrofit engineering.
Important Notice: Isolate the mains and DC link, confirm zero voltage, match the braking resistor and conductor sizing, verify PE continuity, and test the enable/status circuit before commanded deceleration.
Apter Power 6SL3300-1AH32-5BA0 Manuals and Guides
Apter Power 6SL3300-1AH32-5BA0 Product Technical Reference PDF6SL3300-1AH32-5BA0 Engineering Installation and Verification WorkbookThe first document presents model-specific technical identity and engineering data. The second provides a separate installation, connection and commissioning workflow.
Rapid deceleration of high-inertia loads
6SL3300-1AH32-5BA0 supports this documented SINAMICS drive DC-link braking system engineering task.
Hoist and crane braking
6SL3300-1AH32-5BA0 supports this documented SINAMICS drive DC-link braking system engineering task.
Test-stand energy dissipation
6SL3300-1AH32-5BA0 supports this documented SINAMICS drive DC-link braking system engineering task.
Drive-system retrofit engineering
6SL3300-1AH32-5BA0 supports this documented SINAMICS drive DC-link braking system engineering task.
Read the applicable Siemens instructions before work. Verify 6SL3300-1AH32-5BA0 and the installed-system configuration.
1
Verify the complete 6SL3300-1AH32-5BA0 marking and the assigned SINAMICS drive DC-link braking system position before work.
2
Place the connected machine or process in the approved maintenance state before disturbing 6SL3300-1AH32-5BA0.
3
Isolate the applicable power and field energy, then confirm a safe state before disconnecting 6SL3300-1AH32-5BA0.
4
Record connector, conductor, slot and configuration identities before removal of 6SL3300-1AH32-5BA0.
5
Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies during handling.
6
Confirm that the installed companion hardware and approved project match the 6SL3300-1AH32-5BA0 arrangement.
7
Restore power in a controlled sequence and review device, rack and host diagnostics.
8
Prove the intended function and retain the final test result before returning 6SL3300-1AH32-5BA0 to service.
Technical notes
Isolate the mains and DC link, confirm zero voltage, match the braking resistor and conductor sizing, verify PE continuity, and test the enable/status circuit before commanded deceleration.
FAQ View All FAQ
-
What is 6SL3300-1AH32-5BA0?Siemens 6SL3300-1AH32-5BA0 is sinamics braking module. It switches a connected braking resistor to dissipate regenerative DC-link energy in a compatible SINAMICS drive system.
-
Which system uses 6SL3300-1AH32-5BA0?Use 6SL3300-1AH32-5BA0 only in the documented SINAMICS drive DC-link braking system arrangement and the installed hardware configuration.
-
What should be checked before installing 6SL3300-1AH32-5BA0?Confirm the complete marking, assigned position, companion hardware and approved configuration before field work.
-
How should wiring be handled when replacing 6SL3300-1AH32-5BA0?Record every connector and conductor before removal, preserve polarity and shielding, and follow the applicable manufacturer connection instructions.
-
How is 6SL3300-1AH32-5BA0 configured after replacement?Restore only the approved project or device settings, then verify status and diagnostics before automatic operation.
-
How should 6SL3300-1AH32-5BA0 be commissioned?Energize under controlled conditions, exercise the intended system function and record the final diagnostic state.
-
What maintenance record is needed for 6SL3300-1AH32-5BA0?Retain the as-found connection record, installed position, configuration revision and functional-test result.
-
Can 6SL3300-1AH32-5BA0 be substituted directly?A substitution requires complete catalog-number, hardware-revision, interface and system-compatibility checks against the controlling documentation.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.