Siemens 6GK1503-3CD00 is an evidence-bounded PROFIBUS OLM/G12-EEC V4.0 optical link module. Siemens official product or system documentation identifies article 6GK1503-3CD00 exactly.
- Siemens article number: 6GK1503-3CD00
- Product type: PROFIBUS OLM/G12-EEC V4.0 optical link module
- Published role / rating: one RS-485 and two glass-fiber interfaces; four BFOC sockets; -20 to +60 C
- Lifecycle: ACTIVE
System role: one RS-485 and two glass-fiber interfaces; four BFOC sockets; -20 to +60 C Only facts stated by the cited Siemens material are published; sibling, successor and third-party data are not transferred. Architecture boundary: Use only with the exact SIMATIC family, hardware revision, firmware, connector and engineering configuration documented by Siemens. Do not treat a predecessor, successor, pack-size variant, conformal-coated variant or software license as the same hardware article. Before installation or replacement, verify the complete physical label, host equipment, companion hardware, wiring and approved commissioning procedure. Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Important Notice: Verify the complete Siemens 6GK1503-3CD00 physical label and installed-system documentation before use.
Apter Power 6GK1503-3CD00 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from the cited Siemens official evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current Siemens documents, and host-system requirements before installation or replacement.
Installed-base maintenanceSupports evidence-led identification and replacement planning for Siemens 6GK1503-3CD00.
System documentationProvides a source-traceable boundary for the documented SIMATIC automation system configuration.
Commissioning reviewGuides identity, companion-hardware, wiring and controlled functional checks before return to service.
Migration assessmentSeparates exact-model facts from successor, sibling and family-level information.
Read and follow the exact Siemens documentation and host-equipment instructions before work. Verify the complete physical nameplate and system configuration.
1Verify the complete Siemens 6GK1503-3CD00 label, revision and installed-system documentation before use.
2Do not treat a predecessor, successor, pack-size variant, conformal-coated variant or software license as the same hardware article.
3De-energize the equipment and follow the site's approved electrical and process-safety procedure before disturbing hardware or wiring.
4Back up controller, drive, network and configuration data before replacement, migration or firmware work.
5Verify every companion module, cable, connector, termination and power source from approved drawings.
6Do not copy electrical, communication, mechanical or lifecycle values from a related model or successor.
7Perform a documented functional test and confirm diagnostics, alarms and fail-state behavior after work.
8Origin and HS code remain unpublished unless an exact manufacturer record or the physical package label establishes them.
Videos
News
Applications
