Bently
View products
Product image is representative; revision or series may vary. Contact us to request a specific version.
Get a quick price for 6DR5510-0EG00-0AA0
For more information on how your data is processed and stored by Apterpower please read our privacy policy
Technical specifications for 6DR5510-0EG00-0AA0
-
Manufacturer:Siemens
-
Product Category:General Automation
-
Spare Part Number:6DR5510-0EG00-0AA0
-
Estimated shipping dimensions:23.3x10.4x11cm
-
Weight:1 kg
-
Tariff Code:8537101190
-
Counliy of origin:Germany
-
Product Type:Electropneumatic positioner
-
Product Family:SIPART PS2 PA
-
Communication:PROFIBUS PA
-
Actuator Action:Single acting
-
Bus Supply:9-24 V
-
Supply Air:1.4-7 bar
Information
Overview
Manuals
Common Applications
Product Precautions
In a PROFIBUS PA valve loop, Siemens 6DR5510-0EG00-0AA0 converts the digital position demand into controlled pneumatic motion and returns actuator position and diagnostic status to the automation system.
- Closes the valve-position loop through mechanical feedback
- Meters output air for a single-acting actuator
- Exchanges command and diagnostic data on the PA segment
- Supports linear or part-turn valve assemblies with the correct mounting hardware
The exact execution combines a polycarbonate enclosure with an M20 electrical entry, G 1/4 pneumatic connection and the documented ingress-protection ratings. Its hazardous-area suitability remains dependent on the markings carried by the installed unit.
Set up the mechanical travel before initialization, then confirm direction of action, end positions and stable response from the controller command through to the final control element.
Important Notice: The installed approval marking and intrinsic-safety loop parameters determine the permissible ambient and connection boundary; the order code alone does not replace that check.
Siemens 6DR5510-0EG00-0AA0 Manuals & Downloads
6DR5510-0EG00-0AA0 Technical Reference (PDF)6DR5510-0EG00-0AA0 Installation & Commissioning Guide (PDF)
Important Notice: The Technical Reference records the PA interface, enclosure and pneumatic boundaries; the Installation & Commissioning Guide covers mounting, intrinsic-safety checks, initialization and valve-response acceptance.
Linear control valvePosition a single-acting linear pneumatic actuator through the approved mechanical mounting and feedback arrangement.
Part-turn control valveControl a single-acting rotary actuator after the correct travel, direction and linkage are configured.
PROFIBUS PA loopExchange command, status and diagnostic data through an approved PA segment and intrinsic-safety design.
Hazardous-area serviceUse the documented intrinsically safe execution within its marked gas group, temperature class and ambient limits.
Verify the full 6DR5510-0EG00-0AA0 order code, hazardous-area approval, PROFIBUS PA segment, actuator action and pneumatic limits before installation or replacement.
1Record the full 6DR5510-0EG00-0AA0 label and approval markings.
2Isolate process pressure, actuator air and fieldbus energy before work.
3Verify the PROFIBUS PA segment and intrinsic-safety parameters.
4Keep supply air within the documented 1.4-7 bar range.
5Confirm single-acting actuator action, linkage and travel direction.
6Seal the M20 entry and G 1/4 pneumatic connections correctly.
7Run initialization and verify the full mechanical stroke without binding.
8Record valve response, diagnostics and as-left settings before release.
Technical notes
Verify the full 6DR5510-0EG00-0AA0 order code, hazardous-area approval, PROFIBUS PA segment, actuator action and pneumatic limits. Confirm the 9-24 V bus supply, 1.4-7 bar air supply, full mechanical stroke and as-left diagnostics before release.
FAQ View All FAQ
-
What is Siemens 6DR5510-0EG00-0AA0?It is a SIPART PS2 PA electropneumatic positioner with PROFIBUS PA for a single-acting linear or part-turn pneumatic actuator.
-
Which housing is specified by the exact order code?The exact execution uses a polycarbonate housing.
-
What supply values appear on the manufacturer rating data?The manual's exact rating-plate data specifies 9-24 V for the fieldbus-powered electronics and 1.4-7 bar supply air.
-
Which ingress-protection ratings are stated?Siemens states IP66 and NEMA Type 4X for the documented execution.
-
Which process and cable entries are used?The exact data specifies a G 1/4 pneumatic connection and an M20 x 1.5 electrical cable entry.
-
Does the order code include an option module or attached gauge block?No. The exact ordering-code positions specify no option module and no attached gauge block.
-
Why must the hazardous-area marking be checked on the installed unit?The documented execution is intrinsically safe, and the applicable temperature class changes the permitted upper ambient limit. The installed label and loop design therefore control the final acceptance boundary.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.