Product image is representative; revision or series may vary. Contact us to request a specific version.
Product Describe:
Siemens 6DD1640-0AH0 is used in dynamic drive, motion, and process-control systems where varied real-time signals must be acquired or issued through a coordinated TDC hardware configuration.
For more information on how your data is processed and stored by Apterpower please read our privacy policy
What happens after you enquire
1
Requirement review
We review the part number, quantity and delivery requirements and ask for any missing details.
2
Quotation and availability
We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3
Order confirmation and dispatch
Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.
Technical specifications for 6DD1640-0AH0
Manufacturer:
Siemens
Product Category:
DCS Systems
Spare Part Number:
6DD1640-0AH0
Estimated shipping dimensions:
2x26.1x26.1cm
Weight:
1.23 lbs (0.5 kg)
Tariff Code:
8537101101
Counliy of origin:
Germany
Module:
SM500 signal module
Binary outputs:
16
Binary inputs:
16
Analog inputs:
8
Integrating analog inputs:
4
Analog outputs:
8
Pulse encoder inputs:
4
Absolute encoder inputs:
4
Analog output range:
-10 to +10 V, plus/minus 10 mA
Analog output resolution:
12 bit
Weight:
0.558 kg (1.230 lb) net weight — Siemens SiePortal for complete catalog number 6DD1640-0AH0.
Dimensions:
Siemens SiePortal lists official packaging dimensions 30.3 × 23.3 × 4.2 cm (L × W × H). Exact device W × H × D is not stated; do not use packaging dimensions for mounting.
The Siemens 6DD1640-0AH0 is an SM500 signal module for SIMATIC TDC systems. It concentrates binary, analog, encoder, and pulse interfaces so high-performance control applications can exchange field and drive signals with the configured processor and interface modules.
SM500 signal module
16
16
8
It is used in dynamic drive, motion, and process-control systems where varied real-time signals must be acquired or issued through a coordinated TDC hardware configuration.
Important Notice: Use the complete 6DD1640-0AH0 code and verify the physical nameplate and current Siemens documentation before installation or replacement.
Important Notice: These are two separate Apter Power documents prepared from the manufacturer-published Siemens information named in each document. Confirm the physical nameplate, current Siemens documents, and host-system requirements before installation or replacement.
High-performance drives
Exchange encoder, analog, and binary signals for fast control loops.
Rolling and converting lines
Coordinate motion feedback and actuator commands.
Process and test systems
Combine varied real-time signal types in one TDC module.
Read and follow the exact Siemens documentation and host-equipment instructions before use. Verify 6DD1640-0AH0 from the physical nameplate.
1
Use only the channel wiring and cable types specified for SM500
2
Check SC62 cable routing and interface-module assignment
3
Observe ESD controls
4
Verify analog reference and grounding
5
Back up the TDC project before changing the module
Alternative Names
6DD1640-0AH06DD1640 0AH0Siemens 6DD1640-0AH0
Technical notes
Use the complete 6DD1640-0AH0 identifier. 6DD1640-0AH0 belongs to the legacy SIMATIC TDC hardware generation covered by the reviewed manual. Confirm current service status with Siemens. Values not published in the cited Siemens source are intentionally not inferred.
The Siemens 6DD1640-0AH0 is an SM500 signal module for SIMATIC TDC systems. It concentrates binary, analog, encoder, and pulse interfaces so high-performance control applications can exchange field and drive signals with the configured processor and interface modules.
What is the specific function of 6DD1640-0AH0?
It is used in dynamic drive, motion, and process-control systems where varied real-time signals must be acquired or issued through a coordinated TDC hardware configuration.
Which signals, power, or data does 6DD1640-0AH0 handle?
Module: SM500 signal module. Binary outputs: 16. Binary inputs: 16. Analog inputs: 8.
Which system uses 6DD1640-0AH0?
6DD1640-0AH0 belongs to the SIMATIC TDC context described in the cited Siemens source.
Which components are compatible with 6DD1640-0AH0?
SIMATIC TDC rack and processor configuration specified by Siemens SBxx or SU12 interface modules connected with the prescribed SC62 cable Sensors, encoders, and loads within the SM500 channel specifications
Where is 6DD1640-0AH0 applied?
High-performance drives: Exchange encoder, analog, and binary signals for fast control loops. Rolling and converting lines: Coordinate motion feedback and actuator commands. Process and test systems: Combine varied real-time signal types in one TDC module.
What is the lifecycle status of 6DD1640-0AH0?
6DD1640-0AH0 belongs to the legacy SIMATIC TDC hardware generation covered by the reviewed manual. Confirm current service status with Siemens.
What must be checked before installing 6DD1640-0AH0?
Use only the channel wiring and cable types specified for SM500 Check SC62 cable routing and interface-module assignment Observe ESD controls Verify analog reference and grounding Back up the TDC project before changing the module
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.