Schneider Electric MC-4/11/01/400 is an exact ELAU PacDrive M legacy frequency and servo-drive reference. Schneider's current legacy-product page verifies the complete reference and identifies it as part of the PacDrive M installed base.
- Manufacturer: Schneider Electric / ELAU
- Exact reference: MC-4/11/01/400
- Product family: PacDrive M
- Product type: Legacy frequency and servo drive
The official product page marks MC-4/11/01/400 discontinued since 3 October 2022. Schneider states that the reference has not been replaced and directs users to customer support; the page also indicates that repair services are offered. This evidence-bounded page supports installed-base identification, service planning and migration review. It does not infer input voltage, current, power, axis, feedback, connector or motor ratings from the suffix, sibling MC-4 variants or nonofficial manuals. Before replacement or repair, verify the complete label, revision, PacDrive controller, power supply, motor, feedback, safety circuit, wiring and machine software. A migration to another platform is an engineered system project rather than a direct product substitution.
Important Notice: Verify the exact MC-4/11/01/400 label and complete installed PacDrive M configuration; Schneider states that this reference has no direct replacement.
Apter Power MC-4/11/01/400 Manuals and Guides
Important Notice: The first link is the model-specific product-parameters PDF prepared only from cited manufacturer evidence; the second link is the Apter Power product information manual. Confirm the physical nameplate, current manufacturer documents, supply contents and host-system requirements before installation or replacement.
PacDrive M installed-base maintenanceProvides an exact-reference identity and lifecycle boundary for machines that already use MC-4/11/01/400.
Repair and spare planningSupports discussion with Schneider service or qualified repair channels while preserving the original machine configuration boundary.
Machine documentation recoverySeparates verified model and lifecycle facts from unverified electrical, motor, feedback and connector details.
Engineered migration assessmentFrames a PacDrive M modernization as a controller, supply, drive, motor, safety and software project rather than a drop-in substitution.
Read the exact Schneider Electric and machine-builder documentation before work. Verify the full label, stored energy, controller, supply, motor, feedback, safety circuit, wiring and machine software.
1Verify the complete MC-4/11/01/400 physical label, revision and machine documentation before quotation or work.
2Follow the machine builder's and Schneider Electric's approved lockout, discharge and stored-energy procedures.
3Do not energize from an inferred voltage or power rating; confirm every rating from the exact nameplate and approved documentation.
4Verify the PacDrive controller, power supply, motor, feedback device, braking arrangement, safety circuit and all connectors.
5Back up machine software, drive parameters and safety configuration before removal, repair or migration.
6Do not treat a sibling MC-4 suffix as an interchangeable replacement.
7Schneider states that this exact reference has no replacement; any modernization must be engineered and validated as a system change.
8After service, verify insulation, protective earth, phase order, feedback, limits, safety functions, motion direction and controlled stop behavior.
9Reconfirm current repair availability with Schneider Electric for the destination region and service date.
10Origin, HS code, dimensions and exact shipment weight remain unpublished in the cited official evidence.
Videos
News
Applications
