Which alarms or status indications should be reviewed after replacing 10026-02-12-05-02?

Confirm the full 10026-02-12-05-02 marking and reverse-mount execution. Maintain the documented cable bend radius and connector-tightening method.

10026-02-12-05-02

Name: 10026-02-12-05-02
Brand: METRIX
SKU: 10026-02-12-05-02

High-Pressure Reverse-Mount Proximity Probe

Product image is representative; revision or series may vary. Contact us to request a specific version.

Product Describe：

METRIX 10026-02-12-05-02 is a high-pressure reverse-mount proximity probe from the 10026 product family. It provides an 8 mm eddy-current sensing interface for installations using the matching high-pressure probe mount and transducer system.

Ask our team:

Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com

Dispatch Planning
Confirm stock and lead time with our team.

Dedicated Manager
Personalized one-to-one VIP service

ISO 9001:2015 Certified
Trusted quality management

Get a quick price for 10026-02-12-05-02

E-mail *

Mobile *

Company

Content *

Quantity *

Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Get a Quote

For more information on how your data is processed and stored by Apterpower please read our privacy policy

What happens after you enquire

1

Requirement review

We review the part number, quantity and delivery requirements and ask for any missing details.
2

Quotation and availability

We confirm the proposed item, condition, availability, price and estimated lead time in the quotation.
3

Order confirmation and dispatch

Once the quotation and purchasing details are agreed, your contact will coordinate the order and available dispatch information.

Technical specifications for 10026-02-12-05-02

Manufacturer:

METRIX
Product Category:

Machinery Monitoring Systems
Spare Part Number:

10026-02-12-05-02
Estimated shipping dimensions:

55.5x1.5x1.5cm
Weight:

0.04 kg
Tariff Code:

8537101190
Counliy of origin:

USA
Product family:

10026
Probe style:

Reverse mount
Tip diameter:

8 mm
Probe thread:

3/8-24 UNF
Pressure rating:

1000 psig (6.89 MPa)
Tip material:

Ryton
Case material:

300-series stainless steel
Cable impedance:

95 ohm
Connector:

Gold-plated brass
Minimum bend radius:

25 mm
Probe and cable temperature:

-40 to +177 deg C
Target material:

4140 steel
Relative humidity:

100 percent condensing; not submersible

View as PDF Ask for Quote

Information

Overview Manuals Common Applications Product Precautions

10026-02-12-05-02 provides a sealed reverse-mount 8 mm proximity sensing point for a documented high-pressure installation.

Uses a reverse-mount construction for the sealed probe assembly
Supports the documented high-pressure mounting arrangement
Carries the eddy-current probe signal through abrasion-resistant cable
Provides exact article identity for controlled probe replacement

The probe is fitted into the approved high-pressure sleeve and housing arrangement, with cable routing and connector protection maintained outside the pressure boundary. Commissioning checks mount identity, insertion depth, pressure seal, static gap and transducer response.

Important Notice: Confirm 10026-02-12-05-02, reverse-mount probe, 8 mm tip, 3/8-24 UNF mount, 5499 housing and sleeve, pressure rating, seal condition, cable route, connector, matching transducer electronics, static gap and controlled pressure and response tests before commissioning.

Apter Power 10026-02-12-05-02 Manuals and Guides

The first document is the model-specific technical and system reference. The second is a distinct field workbook for installation, wiring, commissioning and acceptance records.

High-pressure compressor monitoring

Measures shaft motion where the probe mount must retain a pressure boundary.

Sealed bearing-housing installations

Supports proximity measurement through the matching high-pressure sleeve.

Shaft-vibration measurement

Provides the sensing element of a documented eddy-current loop.

High-pressure probe replacement

Restores the exact probe and mount relationship without disturbing system calibration.

Read the applicable METRIX installation instructions before work. Verify 10026-02-12-05-02, the installed host system and all configured field interfaces before isolation, wiring or commissioning.

Confirm the full 10026-02-12-05-02 marking and reverse-mount execution.

Depressurize the probe location and place the machine in maintenance state.

Isolate the monitoring loop and protect the probe connector from contamination.

Inspect the 5499 housing, probe sleeve, O-ring and pressure-seal surfaces.

Maintain the documented cable bend radius and connector-tightening method.

Verify insertion depth and keep the probe tip clear of the target during adjustment.

Match the probe to the approved extension and signal conditioner arrangement.

Restore pressure integrity, set gap and prove polarity and response before release.

Technical notes

Install 10026-02-12-05-02 only in the documented reverse-mount high-pressure arrangement with the matching 5499 mounting hardware. Protect the pressure seal, maintain cable bend radius and connector torque, then set gap and verify the complete proximity loop under controlled conditions.

FAQ View All FAQ

Which complete article marking distinguishes 10026-02-12-05-02 from nearby variants?

Confirm 10026-02-12-05-02, reverse-mount probe, 8 mm tip, 3/8-24 UNF mount, 5499 housing and sleeve, pressure rating, seal condition, cable route, connector, matching transducer electronics, static gap and controlled pressure and response tests before commissioning.
What system function is assigned specifically to 10026-02-12-05-02?

Uses a reverse-mount construction for the sealed probe assembly. It provides an 8 mm eddy-current sensing interface for installations using the matching high-pressure probe mount and transducer system.
How should the host position and mating hardware for 10026-02-12-05-02 be verified?

The probe is fitted into the approved high-pressure sleeve and housing arrangement, with cable routing and connector protection maintained outside the pressure boundary. Commissioning checks mount identity, insertion depth, pressure seal, static gap and transducer response.
Which power, signal or field circuits must be controlled before servicing 10026-02-12-05-02?

Depressurize the probe location and place the machine in maintenance state. Isolate the monitoring loop and protect the probe connector from contamination.

What wiring or connector checks are required for 10026-02-12-05-02?

Verify insertion depth and keep the probe tip clear of the target during adjustment.
How is the approved software or hardware setup for 10026-02-12-05-02 preserved?

Match the probe to the approved extension and signal conditioner arrangement.
Which alarms or status indications should be reviewed after replacing 10026-02-12-05-02?

Confirm the full 10026-02-12-05-02 marking and reverse-mount execution. Maintain the documented cable bend radius and connector-tightening method.
How is a controlled functional release completed for 10026-02-12-05-02?

Restore pressure integrity, set gap and prove polarity and response before release.

Manufacturers

Supporting new and legacy automation

Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.

Please try to be as accurate as possible with your search.
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
We can't find any results for “”.