• Please try to be as accurate as possible with your search.
  • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
  • We can't find any results for “”.
    SEE MORE
      SEE PRODUCTS IN SEARCH PAGE ()
      Speak to a sourcing specialist
      sales13@apterpower.com
      About Us Contact Us
      +86 18030235313 Need the right part?We are here to help.

      4329G

      Tricon Network Communication Module
      Triconex 4329G (1)
      Triconex 4329G (2)
      Triconex 4329G (3)
      Triconex 4329G (1)
      Triconex 4329G (2)
      Triconex 4329G (3)
      Product image is representative; revision or series may vary. Contact us to request a specific version.

      Product Describe：

      Triconex 4329G is a Network Communication Module for supported Tricon systems. Its two coaxial network ports and serial service interface connect the controller to the documented Tricon communication environment.
      • Manufacturer part number
        4329G
      • Shipping
        Swift global dispatch
      • Condition
        New, original product
      • Shipping size (est.)
        2.2cm × 41cm × 39.8cm
      • Country of Origin
        USA

      Ask our team:

      Phone: +86 180 3023 5313 E-Mail: sales13@apterpower.com
      Dispatch Planning
      Confirm stock and lead time with our team.
      Dedicated Manager
      Personalized one-to-one VIP service
      ISO 9001:2015 Certified
      Trusted quality management
      Get a quick price for 4329G
      E-mail *
      Mobile *
      Company
      Content *
      Quantity *
      Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
      Get a Quote
      For more information on how your data is processed and stored by Apterpower please read our privacy policy

      What happens after you enquire

      • 0

        Review your reference

        Send the complete 4329G marking, quantity and current label photos. We will review the exact network communication module and installed Tricon system configuration.

      • 1

        Confirm the offer

        Check the quoted reference, condition, included items and expected dispatch date before approving your order.

      • 2

        Arrange dispatch

        Confirm the delivery address and receive the tracking reference when the shipment is arranged.

      • Match the complete marking

        Include 4329G and any visible revision or assembly number on the item. Keep the exact reference on the enquiry and quotation.

      • Check the offered item before ordering

        Request current label, connector and board photos. Compare the offered network communication module with the installed Tricon chassis, system design and approved maintenance record.

      Technical specifications for 4329G

      • Manufacturer:
        Invensys
      • Product Category:
        PLC Systems
      • Spare Part Number:
        4329G
      • Weight:
        2.38 kg
      • Tariff Code:
        8537101190
      • Network ports:
        2 BNC ports
      • Network cable:
        RG58, 50 ohm thin coaxial
      • Serial interface:
        1 RS-232-compatible port
      • Port isolation:
        500 V DC
      • Communication speed:
        10 Mbit/s
      • Logic power:
        <20 W
      • Supported protocols:
        Peer-to-Peer, Time Synchronization, TriStation, TSAA
      • Tricon version scope:
        v10.x or earlier
      View as PDF Ask for Quote

      Information

      Overview Downloads Applications / Compatibility Product Precautions
      • The module presents two BNC network connectors for RG58 50-ohm thin coaxial cable and one RS-232-compatible serial port. The 10 Mbit/s network path supports controller peer exchange, time synchronization and approved engineering or application communications.
      Network: Two 10 Mbit/s coaxial ports
      Service: Separate RS-232 interface
      Version boundary: Tricon v10.x or earlier
      The module presents two BNC network connectors for RG58 50-ohm thin coaxial cable and one RS-232-compatible serial port. The 10 Mbit/s network path supports controller peer exchange, time synchronization and approved engineering or application communications.

      The original 4329G specification limits system compatibility to Tricon v10.x or earlier. This is a hard version boundary: a later controller release must not be assumed compatible from connector fit alone.

      Network health is indicated by module Pass, Fault and Active status and by transmit and receive indications on each network port. Service work should document node identity, coax termination, host firmware and software communication settings before removing the module.
      Controller platform reference: Tricon v9–v10 network communication architecture. Match the installed configuration and interfaces.
      Technical downloads for Triconex 4329G: an Apter Power technical reference and an installation and commissioning guide.
      These Apter Power documents support product identification and service planning. Apply the approved system and site procedures during installation.
      Network: Two 10 Mbit/s coaxial ports

      Version boundary: Tricon v10.x or earlier
      Installation and commissioning checks for Triconex 4329G.
      Check firmware scope

      Verify the host is within the published v10.x-or-earlier range.

      Inspect coax

      Confirm RG58 50-ohm cable and proper termination.

      Record network identity

      Capture node and port assignments before exchange.

      Preserve serial settings

      Document the RS-232 service connection parameters.

      Observe isolation

      Use the approved Tricon maintenance procedure.

      Check LED sequence

      Verify Pass, Fault, Active, TX and RX states after restoration.

      Alternative Names

      Triconex 4329G

      Technical notes

      Network topology: Check the two 50-ohm coaxial paths and terminations.

      Protocol commissioning: Enable only approved peer, time and engineering connections.

      Version qualification: Confirm controller firmware is within the published 4329G scope.

      FAQ View All FAQ

      • Can 4329G be used on a Tricon v11 system?
        The cited 4329G specification states compatibility with v10.x or earlier; do not assume v11 operation.
      • What cable must be checked for 4329G network ports?
        The original table specifies RG58 50-ohm thin coaxial cable; check both cable type and network terminations.
      • How can loss of one network path on 4329G be isolated?
        Compare TX and RX indications, connector seating, coax continuity and the remote network segment.
      • Which protocol choices are relevant to 4329G?
        Peer-to-Peer, Time Synchronization, TriStation and TSAA are listed; enable only those approved for the installed architecture.
      • What should be backed up before replacing 4329G?
        Record controller version, network node identity, port allocation and engineering-station settings.
      • How is the RS-232 port on 4329G distinguished from the BNC ports?
        It is a separate serial interface; use its own cable and settings rather than coax network assumptions.
      • What isolation rating applies to 4329G ports?
        The published NCM table gives 500 VDC for network and RS-232 ports; installation still follows site isolation rules.
      • What acceptance evidence should follow 4329G replacement?
        Record stable module status, traffic on the expected ports and successful approved application communications.
      Manufacturers

      Supporting new and legacy automation

      Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
      • Please try to be as accurate as possible with your search.
      • We can quote you on 1000s of specialist parts, even if they are not listed on our website.
      • We can't find any results for “”.
        SEE MORE
          PRODUCTS IN SEARCH PAGE ()
          50+ account managers available now
          Related reading

          Related cases and sourcing guidance

          View all case studies
          Manufacturers

          You May Also Like

          Explore related automation components available through Apter Power.
          Manufacturers

          Product Browsing History

          Revisit the products you recently viewed on Apter Power.
          SPEAK TO OUR TEAM
          Let’s find the right solution for you.
          Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.

          • Whatsapp: +86 18030235313

            Send us a message.

          • sales13@apterpower.com

            Complete our online form.

          • +86 18030235313

            Speak to our team in your native language.
          Triconex 4329G (1)
          Triconex 4329G (2)
          Triconex 4329G (3)
          Triconex 4329G (1)
          Triconex 4329G (2)
          Triconex 4329G (3)