How should energy be isolated before handling DS200FCRRG1AKD?

Use the host-equipment isolation procedure, remove applicable control and field energy, discharge stored energy and prove the required safe state.

What compatibility checks apply to DS200FCRRG1AKD?

Match DS200FCRRG1AKD to the exact host platform, assigned position, interfaces, hardware revision and approved project record.

How should engineers configure DS200FCRRG1AKD after installation?

Restore only the approved installed-system settings and assignments; do not transfer parameters from a visually similar catalog number.

Which diagnostics should be reviewed when commissioning DS200FCRRG1AKD?

Check local indications, host diagnostics, interlocks and the complete commanded or measured signal path before automatic operation.

How is the functional path of DS200FCRRG1AKD tested?

Apply a controlled test from the originating command or field condition through the connected hardware and record the final response.

What maintenance evidence should be retained for DS200FCRRG1AKD?

Retain the as-found record, installed position, revision identity, configuration reference, diagnostic state and signed acceptance result.

What installed system position is assigned to DS200FCRRG1AKD?

Confirm the documented GE generator excitation and drive-control hardware position, complete catalog identity and mating hardware before removing DS200FCRRG1AKD.

Which connection records are needed before replacing DS200FCRRG1AKD?

Record each connector, conductor, shield, polarity, jumper and position identifier in the as-found state.

GE DS200FCRRG1AKD GE DS200 firing-circuit regulator board

Name: DS200FCRRG1AKD
Brand: General Electric
SKU: DS200FCRRG1AKD

DS200FCRRG1AKD

GE DS200 firing-circuit regulator board

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for DS200FCRRG1AKD

Manufacturer:

General Electric

Product Category:

Gas turbine control

Spare Part Number:

DS200FCRRG1AKD

Estimated shipping dimensions:

29.3x27x3.3cm

Weight:

0.84 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Board family:

DS200

Board designation:

FCRR

Functional group:

Firing-circuit regulation

Group code:

Primary revision:

Secondary revision:

Artwork revision:

Information

Overview Manuals Common Applications Product Precautions

GE DS200FCRRG1AKD is ge ds200 firing-circuit regulator board. It conditions the documented firing-control path used to coordinate power-converter switching in the installed GE excitation or drive-control assembly.

Maintains the FCRR firing-regulator board function
Retains the G1 board-group execution
Uses the complete AKD hardware revision identity
Supports pulse-path and converter-response verification

DS200FCRRG1AKD is installed with compatible GE excitation or drive controller, firing-signal harness, power-converter bridge, approved regulator configuration.

Engineered applications include Generator excitation cabinet service, Converter firing-path restoration, Regulator board replacement, Controlled bridge recommissioning.

Important Notice: Secure the generator or driven equipment, isolate all converter energy and preserve every firing-harness position before replacing DS200FCRRG1AKD; verify pulse inhibit first, then prove regulated bridge response with the approved commissioning procedure.

Apter Power DS200FCRRG1AKD Manuals and Guides

Apter Power DS200FCRRG1AKD System Technical Reference PDF Apter Power DS200FCRRG1AKD Field Installation and Acceptance Workbook PDF

The first document consolidates model-specific technical identity and system context. The second provides a separate field workflow for installation, connection checks and commissioning records.

Generator excitation cabinet service

Restores the firing-regulator interface within its documented converter cabinet.

Converter firing-path restoration

Coordinates acceptance checks from controller command through the installed pulse path.

Regulator board replacement

Supports service work where board revision and firing-harness identity must remain unchanged.

Controlled bridge recommissioning

Provides a controlled sequence for checking inhibit, pulse presence and regulated response.

Read the applicable GE equipment instructions before work. Verify DS200FCRRG1AKD and the installed GE generator excitation and drive-control hardware configuration.

Verify the complete DS200FCRRG1AKD marking and the assigned GE generator excitation and drive-control hardware position before work.

Place the connected machine or process in the approved maintenance state before disturbing DS200FCRRG1AKD.

Isolate the applicable power and field energy, then confirm a safe state before disconnecting DS200FCRRG1AKD.

Record connector, conductor, slot and configuration identities before removal of DS200FCRRG1AKD.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies during handling.

Confirm that the installed companion hardware and approved project match the DS200FCRRG1AKD arrangement.

Restore power in a controlled sequence and review device, rack and host diagnostics.

Prove the intended function and retain the final test result before returning DS200FCRRG1AKD to service.

Technical notes

Secure the generator or driven equipment, isolate all converter energy and preserve every firing-harness position before replacing DS200FCRRG1AKD; verify pulse inhibit first, then prove regulated bridge response with the approved commissioning procedure.

FAQS

How should energy be isolated before handling DS200FCRRG1AKD?

Use the host-equipment isolation procedure, remove applicable control and field energy, discharge stored energy and prove the required safe state.
What compatibility checks apply to DS200FCRRG1AKD?

Match DS200FCRRG1AKD to the exact host platform, assigned position, interfaces, hardware revision and approved project record.
How should engineers configure DS200FCRRG1AKD after installation?

Restore only the approved installed-system settings and assignments; do not transfer parameters from a visually similar catalog number.
Which diagnostics should be reviewed when commissioning DS200FCRRG1AKD?

Check local indications, host diagnostics, interlocks and the complete commanded or measured signal path before automatic operation.
How is the functional path of DS200FCRRG1AKD tested?

Apply a controlled test from the originating command or field condition through the connected hardware and record the final response.
What maintenance evidence should be retained for DS200FCRRG1AKD?

Retain the as-found record, installed position, revision identity, configuration reference, diagnostic state and signed acceptance result.
What installed system position is assigned to DS200FCRRG1AKD?

Confirm the documented GE generator excitation and drive-control hardware position, complete catalog identity and mating hardware before removing DS200FCRRG1AKD.
Which connection records are needed before replacing DS200FCRRG1AKD?

Record each connector, conductor, shield, polarity, jumper and position identifier in the as-found state.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

DS200FCRRG1AKD

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for DS200FCRRG1AKD

Technical specifications for DS200FCRRG1AKD

Information

Information