Which connection records are needed before replacing DS200ADGIH1AAA?

Record each connector, conductor, shield, polarity, jumper and position identifier in the as-found state.

How should energy be isolated before handling DS200ADGIH1AAA?

Use the host-equipment isolation procedure, remove applicable control and field energy, discharge stored energy and prove the required safe state.

What compatibility checks apply to DS200ADGIH1AAA?

Match DS200ADGIH1AAA to the exact host platform, assigned position, interfaces, hardware revision and approved project record.

How should engineers configure DS200ADGIH1AAA after installation?

Restore only the approved installed-system settings and assignments; do not transfer parameters from a visually similar catalog number.

Which diagnostics should be reviewed when commissioning DS200ADGIH1AAA?

Check local indications, host diagnostics, interlocks and the complete commanded or measured signal path before automatic operation.

How is the functional path of DS200ADGIH1AAA tested?

Apply a controlled test from the originating command or field condition through the connected hardware and record the final response.

What maintenance evidence should be retained for DS200ADGIH1AAA?

Retain the as-found record, installed position, revision identity, configuration reference, diagnostic state and signed acceptance result.

What installed system position is assigned to DS200ADGIH1AAA?

Confirm the documented GE DS200/DC2000 drive-control hardware position, complete catalog identity and mating hardware before removing DS200ADGIH1AAA.

GE DS200ADGIH1AAA GE DS200 auxiliary drive interface board

Name: DS200ADGIH1AAA
Brand: General Electric
SKU: DS200ADGIH1AAA

DS200ADGIH1AAA

GE DS200 auxiliary drive interface board

In Stock

Ships by Tuesday, September 22

Fast Shipping Available

Technical specifications for DS200ADGIH1AAA

Manufacturer:

General Electric

Product Category:

Gas turbine control

Spare Part Number:

DS200ADGIH1AAA

Estimated shipping dimensions:

2.5x13x5.5cm

Weight:

0.06 kg

Tariff Code:

8537101190

Counliy of origin:

USA

Board family:

DS200

Board designation:

ADGI

Functional group:

Auxiliary drive interface

Group code:

Primary revision:

Secondary revision:

Artwork revision:

Information

Overview Manuals Common Applications Product Precautions

GE DS200ADGIH1AAA is ge ds200 auxiliary drive interface board. It provides the auxiliary interface path between the installed GE drive controller and its documented peripheral signal or communication connections.

Uses the complete DS200ADGIH1AAA hardware identity
Occupies the assigned auxiliary-interface board position
Preserves the G1 board group and AAA revision execution
Supports interface-path diagnosis before drive operation

DS200ADGIH1AAA is installed with compatible GE drive controller, assigned DS200 board position, documented interface harness, approved drive configuration record.

Engineered applications include DC drive interface restoration, Auxiliary signal-path verification, Drive cabinet board replacement, Controlled controller recommissioning.

Important Notice: Record every DS200ADGIH1AAA connector, jumper and board position before removal; isolate drive and field energy, retain the G1/AAA execution, and prove the auxiliary interface under controlled conditions before enabling the drive.

Apter Power DS200ADGIH1AAA Manuals and Guides

Apter Power DS200ADGIH1AAA System Technical Reference PDF Apter Power DS200ADGIH1AAA Field Installation and Acceptance Workbook PDF

The first document consolidates model-specific technical identity and system context. The second provides a separate field workflow for installation, connection checks and commissioning records.

DC drive interface restoration

Restores the documented auxiliary interface in an installed DC drive cabinet.

Auxiliary signal-path verification

Verifies that each field or communication lead returns to its recorded connector position.

Drive cabinet board replacement

Supports diagnosis of the interface path without transferring settings from another board revision.

Controlled controller recommissioning

Provides a controlled acceptance sequence for board status and connected-device response.

Read the applicable GE equipment instructions before work. Verify DS200ADGIH1AAA and the installed GE DS200/DC2000 drive-control hardware configuration.

Verify the complete DS200ADGIH1AAA marking and the assigned GE DS200/DC2000 drive-control hardware position before work.

Place the connected machine or process in the approved maintenance state before disturbing DS200ADGIH1AAA.

Isolate the applicable power and field energy, then confirm a safe state before disconnecting DS200ADGIH1AAA.

Record connector, conductor, slot and configuration identities before removal of DS200ADGIH1AAA.

Use ESD controls and protect keyed interfaces, exposed contacts and electronic assemblies during handling.

Confirm that the installed companion hardware and approved project match the DS200ADGIH1AAA arrangement.

Restore power in a controlled sequence and review device, rack and host diagnostics.

Prove the intended function and retain the final test result before returning DS200ADGIH1AAA to service.

FAQS

Which connection records are needed before replacing DS200ADGIH1AAA?

Record each connector, conductor, shield, polarity, jumper and position identifier in the as-found state.
How should energy be isolated before handling DS200ADGIH1AAA?

Use the host-equipment isolation procedure, remove applicable control and field energy, discharge stored energy and prove the required safe state.
What compatibility checks apply to DS200ADGIH1AAA?

Match DS200ADGIH1AAA to the exact host platform, assigned position, interfaces, hardware revision and approved project record.
How should engineers configure DS200ADGIH1AAA after installation?

Restore only the approved installed-system settings and assignments; do not transfer parameters from a visually similar catalog number.
Which diagnostics should be reviewed when commissioning DS200ADGIH1AAA?

Check local indications, host diagnostics, interlocks and the complete commanded or measured signal path before automatic operation.
How is the functional path of DS200ADGIH1AAA tested?

Apply a controlled test from the originating command or field condition through the connected hardware and record the final response.
What maintenance evidence should be retained for DS200ADGIH1AAA?

Retain the as-found record, installed position, revision identity, configuration reference, diagnostic state and signed acceptance result.
What installed system position is assigned to DS200ADGIH1AAA?

Confirm the documented GE DS200/DC2000 drive-control hardware position, complete catalog identity and mating hardware before removing DS200ADGIH1AAA.

Individual privacy preferences

We use cookies and similar technologies on our website and process your personal data (e.g. IP address), for example, to personalize content and ads, to integrate media from third-party providers or to analyze traffic on our website. Data processing may also happen as a result of cookies being set. We share this data with third parties that we name in the privacy settings.

The data processing may take place with your consent or on the basis of a legitimate interest, which you can object to in the privacy settings. You have the right not to consent and to change or revoke your consent at a later time. This revocation takes effect immediately but does not affect data already processed. For more information on the use of your data, please visit our privacy policy.

Below you will find an overview of all services used by this website. You can view detailed information about each service and agree to them individually or exercise your right to object.

You are under 14 years old? Then you cannot consent to optional services. Ask your parents or legal guardians to agree to these services with you.

DS200ADGIH1AAA

Product Describe：

Ask our team:

Warranty Policy

Return Notice

Shipping Method

Parts Availability

How to order

Technical specifications for DS200ADGIH1AAA

Technical specifications for DS200ADGIH1AAA

Information

Information