IC200CHS022L

• Side-Mating Bus Connectors: Couples carriers directly to establish backplane communication
• Heavy-Duty Electrical Capacity: Operates up to 2 A per channel with a maximum voltage rating of 264 V AC
• 36-Position IEC Box Terminals: Allocates 32 points for I/O routing and 4 points for common/power ties

The carrier establishes high-speed, low-loss physical cascading with adjacent hardware through slider-type gold finger connectors on both sides, automatically extending the internal parallel data bus to subsequent channel modules. The electrical pins inside the carrier and the terminal blocks are interconnected via heavy copper printed circuit boards, maintaining extremely low temperature rise and internal resistance even under long-term conditions of 2 A continuous high current and 264 V AC continuous high voltage.

The lower portion of the carrier features dual-sided self-locking polycarbonate clips that snap directly onto standard 35 mm DIN rails, or it can be bolted to metal mounting backplanes via pre-drilled holes, satisfying mechanical rigidity standards for anti-vibration and anti-drop protection in harsh industrial environments.

The mechanical keying dials at the top consist of two independent rotatable dials, A and B. When a specific module is first inserted, the dials interlock into position. If a different module with conflicting voltage or signal types is mistakenly inserted later, the physical slots create hard interference to block seating, preventing high-voltage backfeeding into the main control system due to incorrect module placement.