-
Match the complete marking
Include 9292286-01 L-400028 and every revision or approval marking visible on the item. Keep the exact reference on your enquiry and quotation.
-
Check the offered item before ordering
Request available label and interface photos. Have your maintenance team compare the offered 9292286-01 L-400028 reference with the installed equipment and applicable GE documentation.
Technical specifications for 9292286-01 L-400028
-
Manufacturer:General Electric
-
Product Category:Gas Turbine Control
-
Spare Part Number:9292286-01 L-400028
-
Weight:1.36 kg
-
Tariff Code:8537101190
-
Control generation:Speedtronic Mark V
-
Hardware class:Turbine control board
-
Installation format:Rack-mounted plug-in PCB
-
Primary interface:Mark V backplane
-
Connection boundary:Board-edge, ribbon and field interfaces as fitted
-
Configuration basis:Installed Mark V application and slot assignment
-
Service proof:Rack diagnostics and assigned I/O response
Information
- GE 9292286-01 L-400028 is a mark v turbine control board documented for GE Speedtronic Mark V turbine control system.
Dual-marking identity: Both 9292286-01 and L-400028 are retained when screening the offered board and its revision.
Rack-defined function: Slot, backplane and connected terminal-board relationships determine the active control duty.
The board function is governed by its Mark V rack position, backplane relationship, connected interfaces and loaded application. Record these relationships before removal rather than transferring assumptions from another Mark V board.
Replacement work includes ESD-controlled handling, inspection of connectors and revision labels, restoration of the approved configuration, rack diagnostics and a controlled test of the board’s actual assigned turbine functions.
9292286-01 L-400028 Technical Reference
Apter Power technical reference based on GE Mark V installed-base hardware identity for 9292286-01 and L-400028; facts remain within the verified product and system evidence.9292286-01 L-400028 Installation & Verification Guide
Product-specific field guide for identity capture, controlled exchange, commissioning evidence and handover.
Application scope: Apply 9292286-01 L-400028 only where the verified hardware execution, companion equipment and approved system record agree.
Mark V rack restoration
Rebuild the documented board position and backplane relationship.Turbine-control maintenance
Preserve the installed application and protection interlocks.Board-level fault isolation
Separate board, backplane, cable and field-interface causes.Legacy spare verification
Match both complete markings and all revision labels.
Retain application, slot and I/O assignments before removal.
Photograph 9292286-01, L-400028 and every revision label.
Protect board edges and connector contacts.
Check backplane, ribbon cables and field connections for damage.
Verify rack recognition before enabling turbine outputs.
Test only the documented control and indication paths.
Alternative Names
Technical notes
Installed relationship: Mark V rack restoration: Rebuild the documented board position and backplane relationship.
Verified function: Mark V control execution: The board participates in the installed turbine-control application rather than operating as a stand-alone module.
Evidence boundary: GE Mark V installed-base hardware identity for 9292286-01 and L-400028; Control generation is recorded as Speedtronic Mark V
Configuration control: Protect board edges and connector contacts.
Acceptance basis: Retain board photographs, configuration identity, diagnostics and representative assigned-function tests.
FAQ View All FAQ
-
Why must both identifiers on 9292286-01 L-400028 be retained?The two-part marking defines the offered board; either fragment alone can match a different Mark V record or revision.
-
Which Mark V relationships should be recorded before removing 9292286-01 L-400028?Capture rack, slot, backplane, terminal-board links, cable labels and the active application baseline.
-
How should ESD handling be applied to 9292286-01 L-400028?Use grounded handling, protect exposed connector contacts and store the board in approved antistatic packaging.
-
Can connector fit alone prove compatibility for 9292286-01 L-400028?No. Complete markings, revision, slot duty, application and connected interfaces must also agree.
-
What should be checked if 9292286-01 L-400028 is not recognized after installation?Check seating, backplane condition, power rails, revision fit and the approved Mark V configuration before disturbing field wiring.
-
How should the application associated with 9292286-01 L-400028 be protected?Back up the active Mark V configuration and retain the restore and validation procedure.
-
What controlled startup follows fitting 9292286-01 L-400028?Verify rack diagnostics with outputs inhibited, then release only approved turbine functions in the site sequence.
-
What evidence closes service work on 9292286-01 L-400028?Retain board photographs, configuration identity, diagnostics and representative assigned-function tests.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.






