-
Match the complete marking
Send the complete DSTD132 57160001-FX marking, clear photographs of both sides, installed position and connected hardware.
-
Check the offered item before ordering
Compare the offered DSTD132 57160001-FX revision, interface layout and included items with the approved system record before ordering.
Technical specifications for DSTD132 57160001-FX
-
Manufacturer:ABB
-
Product Category:DCS Systems
-
Spare Part Number:DSTD132 57160001-FX
-
Weight:0.35 kg
-
Tariff Code:8537101190
-
Product type:16-Channel Digital Input Connection Unit
-
Primary article number:57160001-FX
-
System family:ABB S100 I/O / Advant OCS
-
Manufacturer designation:DSTD 132
-
Channel count:16
-
Maximum circuit voltage:240 V
-
Companion function:Digital input board termination
-
Mounting accessory:3BSE021202R1 screw kit
-
Signal role:Field-input connection and routing
-
Replacement basis:Complete marking and installed interface
Information
- DSTD132 57160001-FX identifies the exact 16-channel digital input connection unit and its documented relationship within the ABB S100 I/O / Advant OCS.
High-voltage screening boundary: Every circuit is checked against the published 240 V maximum and site category requirements.
Input-state traceability: As-found contact and energized states are recorded before conductors are moved.
The unit routes field input circuits to its companion board. It must not be confused with DSTD110A digital-output termination or DSTX pulse-counter hardware.
Before service, identify each source voltage and contact state. Restore the terminal schedule, then verify input indication and configured process meaning point by point.
DSTD132 57160001-FX Technical Reference
Model-specific ABB data reference covering identity, function, system relationship and verified ratings without unrelated supplier material.DSTD132 57160001-FX Installation & Verification Guide
Field guide for identity capture, controlled exchange, interface checks, commissioning evidence and handover.
Application scope: Use DSTD132 57160001-FX only where the article number, platform, interface layout and installed drawing all agree.
16-channel digital input termination
Preserve documented field contact and voltage-source routing.Alarm and permissive inputs
Confirm normal-state interpretation and safe isolation for each point.S100 cabinet maintenance
Replace a passive connection unit without remapping controller inputs.High-voltage input screening
Apply the approved electrical procedure for circuits approaching the stated maximum.
Photograph every character of DSTD132 57160001-FX, its revision suffix and the installed position before removal.
Apply the approved isolation procedure and prove the affected circuits safe before disconnecting hardware.
Mark plugs, terminal conductors, slot position and companion hardware at both ends.
Use clean ESD-safe handling and prevent bent pins, contamination, side load and unsupported cable weight.
Reproduce the original slot, orientation, connector seating, grounding and cable route.
Verify power, diagnostics and representative channel or controller behavior before handover.
Alternative Names
Technical notes
Exact identity: DSTD132 57160001-FX; article 57160001-FX
System boundary: Verify the installed ABB S100 I/O / Advant OCS configuration and every mating interface before exchange
Technical reference: ABB Advant OCS product data and S100 I/O hardware documentation
FAQ View All FAQ
-
How many input channels are associated with DSTD132 57160001-FX?ABB describes the unit for 16 digital input channels.
-
What maximum voltage is documented for DSTD132 57160001-FX?The manufacturer product data states a maximum of 240 V.
-
Why must DSTD132 57160001-FX not be confused with DSTD110A?DSTD132 is for digital inputs, while DSTD110A is a 32-channel digital output connection unit.
-
What should be measured before disconnecting DSTD132 57160001-FX?Record source voltage, contact state and configured process interpretation for every used channel.
-
How should mixed voltages be handled on DSTD132 57160001-FX?Follow the approved segregation, isolation and site electrical-category requirements for each circuit.
-
Which mounting kit is referenced for DSTD132 57160001-FX?ABB references screw kit 3BSE021202R1 for this connection-unit family.
-
What fault can remain after replacing DSTD132 57160001-FX?A field-source, cable, companion input-board or database fault can remain even when the connection unit is sound.
-
What proves DSTD132 57160001-FX is ready for service?Each tested field state must appear at the correct configured input with clean diagnostics.
Supporting new and legacy automation
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
Related cases and sourcing guidance
View all case studiesYou May Also Like
Product Browsing History
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.






