Get a quick price for IS215VCMIH2CC
For more information on how your data is processed and stored by Apterpower please read our privacy policy
-
Match the complete marking
Match IS215VCMIH2CC, revision and visible labels.
-
Check the offered item before ordering
Confirm GE Mark VI turbine control, companion hardware and wiring.
Technical specifications for IS215VCMIH2CC
-
Manufacturer:General Electric
-
Spare Part Number:IS215VCMIH2CC
-
Weight:0.36 kg
-
Tariff Code:8537101190
-
Network role:IONet and controller data exchange
-
Rack interface:VME backplane
-
Supported architecture:Simplex or TMR Mark VI
-
Redundancy relationship:R, S and T rack communication as configured
-
Clock function:System timing distribution
-
Status monitoring:Controller and I/O communication health
Information
Overview
Downloads
Applications / Compatibility
Product Precautions
- IS215VCMIH2CC coordinates VME-rack communication, deterministic timing and configured redundant data paths in a Mark VI turbine-control system.
Rack communications hub: Coordinates controller, VME rack and I/O data paths for the installed Mark VI architecture.
Timing coordination: Distributes communication timing needed for deterministic controller and I/O exchange.
Redundancy supervision: Helps expose loss or mismatch on configured R, S and T communication paths.
Timing coordination: Distributes communication timing needed for deterministic controller and I/O exchange.
Redundancy supervision: Helps expose loss or mismatch on configured R, S and T communication paths.
IS215VCMIH2CC is a VCMI-family communications interface board for GE Mark VI VME racks. The H2CC suffix is retained as the complete hardware identity and is not reduced to a generic VCMI reference.
Its service role depends on rack position, controller relationship, IONet connections, project configuration and the installed redundancy architecture. A mechanically similar VCMI revision is not automatically interchangeable.
Before removal, export diagnostics and record rack, slot, cable and network assignments. After installation, verify controller communication, I/O data exchange, time synchronization and redundant-path agreement.
Its service role depends on rack position, controller relationship, IONet connections, project configuration and the installed redundancy architecture. A mechanically similar VCMI revision is not automatically interchangeable.
Before removal, export diagnostics and record rack, slot, cable and network assignments. After installation, verify controller communication, I/O data exchange, time synchronization and redundant-path agreement.
Controller platform reference: GE Mark VI turbine control. Follow applicable GE instructions and the approved site drawing.
The technical reference covers VME communication architecture; the guide covers path capture, staged restoration and timing checks.
IS215VCMIH2CC Technical Data Reference
GE Mark VI Turbine Control System Guide GEH-6421M; selected exact-model and documented family data for IS215VCMIH2CC.IS215VCMIH2CC Installation & Verification Guide
Model-specific installation, wiring, inspection and commissioning checks for IS215VCMIH2CC.
The documents separate board identity from live redundant-path verification.
System and supply context: Communication-hub context: The board links controller, rack and I/O data paths while distributing timing required by the installed architecture.
Application scope: Redundancy boundary: Simplex and TMR systems use different cable and path relationships; an H2CC board must be matched to the actual rack execution.
Application scope: Redundancy boundary: Simplex and TMR systems use different cable and path relationships; an H2CC board must be matched to the actual rack execution.
VME rack communication
Exchange controller and I/O data through the installed rack.Mark VI network coordination
Maintain deterministic communication across configured paths.TMR communications
Supervise R, S and T paths in redundant systems.Maintenance diagnostics
Use board and network events to isolate communication faults.
Prepare GE IS215VCMIH2CC for its configured installation using these product-specific checks.
Export the Toolbox configuration
Retain rack and network assignments.
Record every cable position
Label communication and backplane relationships.
Preserve rack slot
Do not move the board to an unconfigured location.
Control electrostatic discharge
Handle the VME board by approved procedures.
Verify redundant paths separately
Check R, S and T health where fitted.
Confirm time and data exchange
Require stable controller and I/O communication.
Alternative Names
GE IS215VCMIH2CC
VME Communications Interface Board IS215VCMIH2CC
Technical notes
Rack-path map: Capture every communication connector, R/S/T designation and peer destination before cable removal.
Timing relationship: Retain the installed clock and synchronization role rather than treating the board as an ordinary network adapter.
Communication acceptance: Confirm rack recognition, path health, timing status and stable controller-to-I/O exchange.
FAQ View All FAQ
-
Why must the full H2CC revision of IS215VCMIH2CC be retained?The complete suffix identifies the supplied hardware execution and prevents an unverified adjacent VCMI revision from being substituted.
-
Which configuration records are essential before removing IS215VCMIH2CC?Save the Toolbox project, rack and slot assignment, network paths, cable locations and active diagnostics.
-
How should TMR communication be checked after fitting IS215VCMIH2CC?Verify each configured R, S and T path independently, then confirm agreement under normal controller operation.
-
What does a healthy rack but missing I/O data suggest for IS215VCMIH2CC?Check IONet cabling, project assignments, board recognition and the destination I/O interfaces before replacing field devices.
-
Why is rack position important for IS215VCMIH2CC?The backplane slot and configured communication role determine how the controller recognizes and uses the board.
-
Which timing evidence should be retained for IS215VCMIH2CC?Record normal synchronization status and the absence of time-distribution or communication events.
-
How should electrostatic risk be controlled for IS215VCMIH2CC?Use grounded handling equipment, approved packaging and cabinet power-isolation procedures.
-
Which R/S/T communication and timing results confirm IS215VCMIH2CC?Require correct rack identity, healthy configured paths, stable timing status and verified controller-to-I/O exchange without persistent diagnostics.
Manufacturers
Supporting new and legacy automation
Whether you're maintaining existing equipment or sourcing parts for current systems, we provide fast, dependable supply you can rely on.
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
PRODUCTS IN SEARCH PAGE ()
50+ account managers available now
Related reading
Related cases and sourcing guidance
View all case studies
Manufacturers
You May Also Like
Explore related automation components available through Apter Power.
Manufacturers
Product Browsing History
Revisit the products you recently viewed on Apter Power.
SPEAK TO OUR TEAM
Let’s find the right solution for you.
Send us the part number, quantity and delivery destination. Our team will help confirm availability and lead time.
-
Whatsapp: +86 18030235313
Send us a message. -
sales13@apterpower.com
Complete our online form. -
+86 18030235313
Speak to our team in your native language.



